您要查找的是不是：
- The results indicate that 3% nano-SiO_2 content can achieve the best overall properties. Tensile strength and bend strength of ESF are improved by 41% and 19%. 结果表明:纳米SiO2的添加量质量分数为3%25时,改性效果最好,其拉伸强度、弯曲强度和不加纳米粒子的ESF相比,分别提高了41%25、19%25;
- The pull strength, bend strength, strike strength, compaction strength, pulling-nail strength could satisfy the mechanical properties of the products making. 拉伸强度、弯曲强度、冲击强度、压缩强度、拔钉强度等力学性能能够满足所生产的产品性能的需要。
- The hard agglomerates that have a bad effect on the microstructure and bend strength of HDIC originates from the self-sintering property of the ultra-fine MCMB. 研磨可破坏团聚体中颗粒的粘结，减少材料的烧结缺陷，进而提高材料性能。
- And the SEM, tensile strength, impact strength, bend strength test is used to characterize the structure and properties of long fiber reinforced ABS composites. 用SEM、拉伸强度、弯曲强度、冲击强度等测试技术研究原位聚合制备的长纤维增强ABS复合材料的结构与性能。
- A quantitative characterization method for leather softness was established based on the relationship among leather softness and its bend strength and compressibility. 根据皮革柔软度与其抗弯强度和可压缩性之间的关系,建立了一种皮革柔软度的定量表征方法。
- When the content of GTC epoxy resin reaches 40%, the modified E-51 has good fluidity and processing, at the same time, the draw strength and the bend strength of the curing have different degree improve, the elongation can be increased 40%. 用GTC环氧树脂改性E-51环氧树脂，GTC含量达到4096时，具有良好的流动性和加工性，其固化物的拉伸强度、弯曲强度均有不同程度的提高，同时伸长率提高40%25。
- Stiffness It is a measure of the bending strength of paper and board. 挺度是衡量纸和纸板耐弯曲的强度性能。
- It was founded that the best bending strength was 422 MPa when aids was 18 wt%. 在助剂含量为18wt%25时，抗弯强度最大为422MPa。
- At transition region,the sea ice bending strength reached the maximum value. 海冰的弯曲强度随着应力速率的增加，经过延性、过渡和脆性三个阶段，在过渡区，海冰的弯曲强度达到最大值。
- Optimum wearresistance,high bending strength and high resistance to bonding. 耐磨性较好、较高温的抗弯强度和抗粘结能力。
- Bending strength is that quality which resists forces from causing a member to bend or deflect in the direction in which the load is applied. 弯曲强度是金属抵抗所受负载方向的弯曲和倾斜的能力（性能）。
- His strength in a crisis is an ace in the hole. 临危不惧是他的看家本领。
- The stream takes a sudden bend to the east. 小溪突然转向东流。
- The wood is moderately hard and strong with high bending strength, shear strength and stiffness. 这类木材硬度适中而强壮，具有高度弯曲力、剪力和硬度。
- The Bending strength for concrete bonding was over 7MPa with ester crete-p and 8Mpa with Epcrete-p. 用epcrete p粘合的混凝土试件的抗折强度可达到 8MPa以上 .
- She bend over backwards to show it. 她拼命把他显露出来。
- General bone mineral density (GBMD), femur bending strength (FBS), serum-BGP and urine-Hyp/Cr were measured. 进行相应处理后分别测定各组大鼠全身骨矿物密度(GBMD)、右侧股骨抗弯强度 (FBS)和血清骨钙素 (BGP)、尿羟脯氨酸 (U -Hyp)与肌苷 (U -Cr)。
- They refused to bend to the hijackers' demands. 他们拒绝屈从于劫机者的要求。
- The hardness of the sintered YT15 alloy was 92 1 HRA and bending strength 1351 9MPa. 烧结后的合金硬度为92 1HRA、横向断裂强度为 135 1 9MPa
- Don't bend the wires down, it'll break them. 不要弯折那些线，会弄坏它们的。
