您要查找的是不是：
- beam current control 射束电流控制
- A ns pulse beam device is installed at pulse beam current piping. 在脉冲束流管道上安装有强流毫微秒脉冲化聚束装置。
- A reference to the parent control of the current control. 对当前控件的父控件的引用。
- Gets or sets the identifier for the current Control object. 获取或设置当前Control对象的标识符。
- Short-circuit current control for national grid of the U.K. 英国国家电网的短路电流控制技术。
- The PWM voltage source inverter by current control is used in this system. 在此控制系统中，采用了电流控制PWM电压源逆变器环节。
- In display technique, excessive luminosity of the spot due to excessive beam current. 在显示技术中，指由于电子束电流太大而产生的光点太亮的现象。参阅beam，spot。
- Gets or sets the parent control associated with the current control. 获取或设置与当前控件相关联的父控件。
- Gets the expression bindings for the current control at design time. 获取当前控件在设计时的表达式绑定。
- To different data sources while retaining the current control bindings. 在保留当前的控件绑定的同时,可以将。
- The driver can not open registry enum key under current control set. 驱动程序打不开目前控制设置下的注册表enum项。
- The locally uniform temperature field brazing required could be achieved by using large beam diameter, large scanning radius and small beam current. 结果表明：大束斑直径、大扫描半径和小束流的扫描方式可以获得钎焊所需的局部均匀的温度场。
- The DOM element that the current Control instance is associated with. 与当前Control实例关联的DOM元素。
- The result of calculation indicates that if ripple factorof beam current is kept within 9%,the reproducibility can be controlled 1 %. 结果表明只要束流纹波在9%25以内，剂量重复性可控制在1%25以下。
- Applies a theme and a control skin to the current control at design time, if a. 对象与当前控件相关联,则在设计时将主题和控件外观应用于该控件。
- The design of the gun is commonly defined by perveance, beam current, waist radius, waist position and cathode current density. 它的设计主要有导流系数、流、腰半径、腰位置以及阴极电流密度。
- That represents the top-level control that contains the current control. 它表示包含当前控件的顶级控件。
- These collective instabilities can be severe in the LHC because of the large beam current needed to provide high luminosity. 这种集体不稳定性在LHC中会变得更严重，因为为了达到更高的亮度，我们需要更大的粒子束。
- In order to minimize evaporation and loss of Mg, the considerable increasing of accelerating voltage, beam current and welding speed is preferred. 为减小镁元素烧损，在电子束焊接时可适当增加焊接的加速电压与束流，加快焊接速度。
