您要查找的是不是：
- axial shearing stress 轴向剪切应力
- Critical resolved shear stress (O’crss). 临界分剪切应力。
- Under axial force, moment and shear force steel-concrete joint subjected to compressive stress, tensile stress and shear stress. 在轴力、弯矩和剪力的作用下，钢-混凝土接头处将产生轴向压应力、拉应力和剪应力。
- This paper considers the shear stress on the inclined section caused by axial compression on cast iron and the friction function because of slippage and moving of the inclined section. 本文通过对铸铁受轴向压缩斜截面上剪应力和斜截面滑移错动引起摩擦力作用的考虑;
- With the increase in deviation of the axial crystallographic orientations of the blade, the deviation of the strength increases, by the name of resolved shear stress of the slip systems. 两个不受控的晶体取向变化时，滑移系的分切应力最大有15%25的变化；
- The axial shear modulus has been derived in closed form by using the conformal mapping approach integrated with the Laurent expansion. 利用解析函数的保角变换与罗朗级数展开，获得了轴向剪切模量的封闭公式。
- There is a diminishing difference in the shearing stress with rising pressure. 随着压力的升高，切应力的差值减
- The crushing process is carried out by pressure and shearing stress. 在相应的压力和切力作用下,物料得以破碎。
- The process does not affect the shear stresses. 这样的处理并不影响剪应力。
- The mechanical characteristics on the deformation, pore pressure and shear strength of undisturbed soft clay samples are studied with cyclic axial shear tests. 摘要利用从现场取得的原状土样，通过室内动三轴试验对循环荷载作用下的变形、孔压和强度特性进行研究。
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数。
- According to the twin shear stress theory, this paper improves on Duncan Model. 根据双剪应力理论对邓肯模型进行了修正。
- Tensile stress and shear stress are transferred by PBL shear connectors. 计算得到钠-混凝土接头的最不利荷载组合内力。
- Finite element software ANSYS7.0 is employed to analyze the interlaminar shearing stresses of C_f/epoxy composite tubes under axial loading. 利用有限元程序ANSYS7.;0对软模膨胀成型制备的碳/环氧管件在轴向载荷下的层间剪应力进行了分析。
- A fluid is a substance that deforms continuously under an applied shear stress. 液体在剪应力作用下不断变形？？
- The main shear stress and its hydraulic system, calculation and research. 主要对其剪切力和液压系统进行计算和研究。
- Thus fluid shear stress has been considered one of the atherogenic factors. 在动物研究中还发现切应力与内皮细胞增生程度有关。
- With gob span increasing, equivalent shear stress in basic roof increases. 随着采空区跨度的不断增加，基本顶等效剪力不断增大。
- Draw the element for maximum shear stress and mark values of all stresses. 画出最大剪应力的单元体并标出全部应力值。
- Friction and cohesion are best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 摩擦角和粘结力最好是根据图9中剪切应力和法向应力的关系曲线确定。
