您要查找的是不是：
- axial force measurement 轴向力测量
- Research on Axial Force Measuration and Optimum Design for Thrust Bearing of a Turbocharger 增压器轴向力测量及止推轴承优化设计研究
- Adjustment using direct force measurement. 使用直接测力法来调整。
- It can work steadier to adopt hydraulic balanced axial force. 采用水力平衡轴向力，减少平衡鼓，可使运行更为平稳。
- Single molecule force spectroscopy (SMFS) is a force measurement based on AFM. 单分子力谱是基于原子力显微镜力的测量方法。
- The planimetric position of the piles which endure the extremum axial force is different. 受开挖区域的影响，承受轴力最大值、最小值桩体的平面位置是变化的。
- Using Centrifugal Force Measure Quickly Weighing. 应用离心力测量的快速称重。
- This method is applied to analyze the lateral force of bit linearly with the nonlinear axial force being considerated. 考虑轴向力的非线性影响，应用该方法对底部钻具组合的钻头侧向力进行了线性分析。
- The effects caused by a axial force and the waveness in the surfaces of innerring are analysed. 本文主要对砂轮不平衡量引起的磨削表面波纹度进行了理论分析。
- Overloading of axial force acted on working roll is the primary reason to cause the bearing damage. 工作辊轴向力过载是导致轴承烧损的主要原因。
- This paper analyzes the effect of negative friction on pile s axial force and its calculation. 分析研究负摩擦力对桩轴力的影响及基桩负摩擦力的计算。
- Hydrostatic bearing can solve the equilibrium problem of axial force of multistage centrifugal pump satisfactorily. 液体静压支承技术可以很好地解决多级离心泵轴向力的平衡问题。
- Analvsis of stress and stiffness of the treadling force measurement device by F. E. M. 运动员脚蹬力测定装置的强、刚度分析。
- This paper defines neutral section and neutral point respectively with effective axial force and ac. 本文还用有效轴力和真实轴力分别定义了中性截面和中和点。
- Manufactured to fit - accurate and reliable force measurement in extremely difficult environments. 来满足-实现极端困难环境下精确可靠的力测量。
- The incremental axial force of pile rises to 14kg when the surcharge increases to 1kg/cm2. 而摩擦桩试验中，由于桩体产生较大沉陷量，而拉高中立点位置，使负摩擦力影响范围减少。
- Thin-film sensors are ideally suited to force measurement in complex geometries. 薄膜传感器是复杂几何形状的结构中测量力度的理想选择。
- Axial forces in the three working rollers reaches maximum at startup. 三个工作轮的轴向力随着变矩器的工况变化，在起动工况时达到最大值。
- The force measuring unit works on the hydraulic principle. 力测量单元是基于液压原理工作的。
- The door may be supported in a horizontal plane during the pull force measurement test. 在拉力测量期间，可以在水平面内对门进行支承。
