您要查找的是不是：
- First, linear buckling method is adopted to analyze the axial compression member,and then the conclusions are exerted to the struts structure of BSS. 首先采用线性屈曲理论对任意边界的轴心受压杆件进行了屈曲分析,将分析结果运用到张弦结构的撑杆稳定性当中。
- axial compressive member 轴心压杆
- stability of axial compression members 轴压时的工作性能
- ANALYSIS AND COMPARISON OF FLEXURAL-TORSIONAL BUCKLING OF AXIAL COMPRESSION MEMBER 轴心压杆弯扭屈曲分析及对比
- Experimental study on axial compression member made from double steel tubes both in square cross section with concrete-filled sandwich between external and internal tubes 方中空夹层钢管混凝土轴压构件的试验研究
- The effect of the width-to-thickness ratio and the axial compressive ratio on the hysteretic behav... 随着轴压比增加,构件的最大承载力降低,承载力退化。
- axial compression member 轴压构件
- The load-carrying capacity of a compressive member is reduced as its length is increased. 受压构件的长度增加,其承载力减少。
- Axial compress is produced by the tension of prestressing beam, which engenders the third moment of column. 预应力筋的张拉会造成梁的轴向压缩,在柱中引起第3弯矩,但在工程设计中通常忽略这一因素影响。
- To study the axial compressive behavior of FRP-concrete-steel double-skin tubular stubs(DSTSs),experiments of 3 circular steel tubes and 10 DSTS specimens were carried out. 为研究FRP-混凝土-钢双壁空心管短柱的轴压性能,完成了3个圆钢管短柱和10个双壁空心管短柱试件的轴心抗压试验。
- This paper analyses the beam of variablecross-section (variable stiffness) loaded by axial compressive forcestogether with transverse ones, which is applied in drill strings. 分析了受纵横弯曲载荷联合作用的变截面(变刚度)梁柱问题;并在钻柱力学分析中得到应用.
- Axial compress expander forming has been used to production of high-grade thin-wall three-way connection made of red copper used for building and refrigeration. 介绍了采用轴向压缩胀形成形原理，生产高档建筑及制冷系统用薄壁紫铜管三通接头的成形工艺和模具结构。
- The bucking analysis and application of axial compression members with elastic supports 弹性支承上轴心受压构件的屈曲分析及应用
- Comparative research on method to calculate overall stability of full-web type axially compressed member 钢结构实腹式轴压构件整体稳定性计算方法的比较研究
- In this paper, the forming proccess of Tee tube hydro forming (THF) were studied in detail. Finite element model of THF was established. The influence of processing parameters to the axial compressive bulging was analyzed. 本文详细研究了多通管(以三通管为例)液压胀形的成形过程，建立了多通管液压胀形的有限元模型，分析了轴向压缩胀形过程中各工艺参数对成形过程的影响，研究了三通管复合胀形三个工艺力的加载路径，分析比较了三通管固体介质胀形与液压胀形，最后，研究了三通管液压胀形控制模式。
- Keywords aluminium alloy;axial compression members;plate girders;direct strength method;local buckling;distortional buckling;shear buckling;aluminium alloy plate; 铝合金;轴压构件;组合板件;直接强度法;局部屈曲;畸变屈曲;剪切屈曲;铝合金面板;
- axial compressive experimentation 单轴压缩试验
- axially compressed member 轴心受压构件
- axial compressive load and bi - axial bending 双向压弯
- After having analyzed the common test methods of working stress briefly, the boring-electrical test method is proposed to test the working stress of RC compression member. 对工程中常用工作应力测试方法进行了简要分析，提出利用钻孔－电测法测试钢筋混凝土受压构件的工作应力。
