您要查找的是不是：
- auto spot welding head 自动焊钳
- pincer spot welding head 杠杆式点焊钳
- Usage: suitable for auto starting motor commutator with big wire diameter and armature coil etc. wire spot welding. 用途：适用汽车起动电机较大线径的换向器与电枢绕组等线的点焊。
- pliers spot welding head 点焊钳,钳式点焊头
- pliers spot welding head X 形点焊钳
- Be suitable for spot welding between electric wheels motor plane commutator and wire head. 适用电动车轮鼓电机平面换向器与导线线头的点焊。
- Be suitable for spot welding between rotor wire head and electromotor commutator with hooks and slots. 适用带钩,开槽电机换向器与转子导线线头的点焊。
- Be suitable for spot welding between rotor wire head and electromotor commutator with hooks and slots and plane commutator. 适用带钩,开槽电机径向、平面换向器与转子导线线头的点焊。
- The assemblies of the whole Body is combined by spot welding and Bolting. 整个车身的所有装配件都是由点焊或螺栓组装起来的。
- It has great interest to establish Expert System (ES) for spot welding process. 建立点焊专家系统，对于实现点焊过程的智能化，优化点焊规范参数，降低对操作者的要求，提高点焊质量，具有重要意义。
- Spot welding technology has been USed widely in various industry fie lds. 点焊在工业领域中应用的非常广泛。
- Simultaneity that the welding head can arrive to surface celerity and exact is more importance to reduce the cycle of weld. 同时，也要求焊头能快速而又准确的到达工件的表面，以减短焊接周期。
- Resistance spot welding in aluminum alloy was tested by ultrasonic immersion method with focusing probe. 摘要介绍采用水浸超声聚焦回波检测铝合金电阻点焊焊核直径。
- Expulsion is highly undesirable during the resistance spot welding for it decreases the weld quality. 在电阻点焊过程中喷溅的产生直接降低焊接接头的强度,因此是最不希望出现的焊接缺陷。
- In laser beam welding, an appropriate crossjet nozzle should be mounted under the welding head in order to protect the optics from the welding spatter and smoke. 摘要激光焊接过程中，为了保护聚焦镜和保证焊接质量，通常在聚焦镜下布置一横向气帘喷嘴。
- At each end of the shaft 1 there is an auxiliary welding head 3 which is also movable horizontally and vertically by known means MM2. 两端的轴1有一个辅助焊接头3也是动产的横向和纵向的已知手段平方毫米。
- Be suitable for spot welding between electromotor commutator with hooks and slots and rotor wire. 适用带钩、开槽电机换向器与转子导线的点焊。
- ELECTRIC RESISTANCE WELDING. SPOT WELDING ELECTRODE ADAPTOR WITH PUNCHING COOLING BORE. SIZES AND TOLERANCES. 电阻。带冷却孔的点电极转接套。尺寸和公差。
- Adapt for spot welding of kinds materials as steel and coloured metals, fit for different fitting thickness. 适用钢及有色金属,不同材料,不同厚度构件的点焊及触点的点焊。
- The end-effector can be a welding head, a spray gun, a machining tool, or a gripper containing on-off jaws, depending upon the specific application of the robot. 依机器人具体应用之不同，末端执行器可以是一个焊头、一把喷枪、一个机器人加工刀具，或一个可以开、闭的钳爪。
