您要查找的是不是：
- Atmospheric corrosion rate of pure copper, composition and protectiveness of corrosion product of pure copper was different under the different exposure conditions. 不同暴露环境下，纯铜的大气腐蚀速率、腐蚀产物组成及其保护性都存在差异。
- atmospheric corrosion products 大气腐蚀产物
- The fence wire is resistant to atmospheric corrosion. 这栅栏铁丝耐空气腐蚀。
- We need building materials which are resistant to atmospheric corrosion. 我们需要耐空气腐蚀的建筑材料。
- Extensive corrosion product was found on all surfaces. 在所有表面上都发现了大范围的锈蚀。
- The corrosion product was exa- mined by means of SEM,EMP and X-ray diffraction. 用 SEM,EMP 和 X 射线衍射分析腐蚀产物。
- Figure 3 EDS spectrum of steel corrosion product covered in aluminosilicate. 图3硅酸铝对金属的腐蚀产物EDS图。
- Atmospheric corrosion is generally associated with surface storage conditions, or with upper wellbore annuli that may not be fluid-filled. 大气腐蚀通常与地面储存条件或没有被流体充满的上部井筒环空有关。
- Among the environmental pollution factors, the most detrimental factor is atmospheric sulfur deposition for atmospheric corrosion of carbon steel. 在所研究的环境因子中,对碳钢大气腐蚀危害最大的是大气中的硫沉降因子。
- The results show that NaCl can evidently accelerate the atmospheric corrosion of 7A04 aluminum alloy in several simulated environments. 结果表明：表面沉积氯化钠的7A04铝合金在几种模拟气氛环境中均明显地加速了材料的腐蚀；
- Antonio R Mendoza,Francisco Corvo.Outdoor and indoor atmospheric corrosion of non-ferrous metals[J].Corrosion Science,2000,42:1123. 王振尧;于国才;韩薇.;钢的大气暴露腐蚀与室内模拟加速腐蚀的相关性[J]
- Seamless Copper Tube Material Copper to experts can improve the strength and toughness, in particular, atmospheric corrosion. 无缝管专家介绍铜管材质铜能提高强度和韧性，特别是大气腐蚀性能。
- The corrosion products of the steel ares mainly composed of Fe oxides(Fe_2O_3,Fe_3O_4). 经过30 d的腐蚀后;试样的腐蚀产物主要为铁的氧化物(Fe2O3;Fe3O4).
- The corrosion products on the I-SCC fracture of Zr-Sn-Nb alloys have been investigated by SEM and EDXA. 利用SEM和EDXA对Zr-Sn-Nb合金碘致应力腐蚀断口上的腐蚀产物进行了观察分析。
- Dealloying corrosion and corrosion products of Cu-Al-Mn alloy were studied by EPM technology. 采用电子探针技术研究了Cu-A l-Mn合金脱合金腐蚀现象及其产物。
- The morphology of corrosion products and scale structure were examined with OM,SEM/EDX and XRD. 利用金相、扫描电镜 /能谱及X射线衍射等分析其腐蚀形貌、成分及结构 .
- EDXA results present that the components of corrosion products in biofilms with different growth period are different. 电子能谱对生物膜表面分析结果表明 ,不同生长期生物膜腐蚀产物的Fe/S比各不相同。
- "Normally, corrosion products (e.g., rust, patina) stay on the surface and protect it. 一般腐蚀产物（例如锈、铜绿）会停留在金属表面，并加以保护。
- The composition and morphology of the inclusion will affect the spillage position of the corrosion products. 夹杂物的成分及形态的不同都会影响到产物的溢出位置和方式。
- The surface observation reveals that the corrosion products are agglomerate and accidented. 腐蚀产物微观形貌呈团块状且凹凸不平；
