您要查找的是不是：
- The experimental results of Armco iron, copper, cermet and graphite are given. 给出了Armco铁、铜、金属陶瓷和石墨的测试结果。
- This paper deals with RE-B-Al diffused into the armco iron using pasty method. 采用膏剂法对工业纯铁进行稀土硼铝共渗，观察了渗层组织，探讨了硼化物的形成机制。
- The adsorption behaviour of thiourea (TU) on Armco iron was investigated in 0.5mol. 本文通过测定Armco铁在0.;5mol
- The effect of rare earths on the kinetics of boron-aluminized layer growth of armco iron using Pasty method at 890, 920 and 950 t was studied. 采用膏剂法在890，920和950℃对工业纯铁进行稀土硼铝共渗及硼铝共渗，考察了稀土在各温度条件下对渗层生长动力学的影响。
- Borided layers on the surface of Armco iron and eutectoid carbon Steel were eutectified in furnace and then scanned continuously with laser beam of high power densities. 工业纯铁与共析碳钢表面渗硼层先在炉中处理,以获得共晶组织,然后以高能密度激光束扫描;
- A study of the preferred orientations and microstructure of armco iron after cold reduction and recrystallization has been made. 用极固与金相研究工业纯铁的轧制与再结晶织构和组织。 热轧后的试样经过两种冷轧方法：(1)压下率为98.;8%25，与(2)压下率为64
- This paper deals with the kinetics of the ion nitrided layer growth for armco iron, steels 45, 40Cr, 42CrMo and 38CrMoAl. 本文研究了在不同离子渗氮工艺参数下,纯铁、45钢、40Cr、42CrMo及38CrMoAl钢等五种材料的离子渗氮层长大动力学,建立了长大动力学的数学模式。
- This paper is concerned with the process of the layer formation boronized on armco iron by gas boronizing by means of the method of X-ray. 渗硼层的形成机理,一直是渗硼研究的重要课题。 本文主要采用X射线法对用气体法在工业纯铁上形成渗硼层的过程进行了研究。
- The effect of CW CO2 laser beam irradiation on nitrogen ion-implanted ARMCO iron specimens has been studied in this paper. 研究了工业纯铁离子注N后的连续CO_2激光热处理效应。
- Nanocrystallization of Armco iron by severe rolling exhibited high sur1ce activity but it exhibited low shear force due to its poor plasticsity. 经深度轧制后，纳米化纯铁具有较高的表面活性，但同时由于塑性的丧失只能承受较小的剪切力。
- The crystal growth of Armco iron,electrolytic iron and dilute solid solutionalloys,Fe-0.05wt-%Ti and Fe-0.5wt-%Ti,has been investigated by the strain-annealtechnique. 用应变退火法研究工业纯Fe、电解纯Fe;Fe-0.;05wt-%25Ti和Fe-0
- This paper deals with the affact of carbon concent in steels on plasma surface alloying of W-Mo by the double glow dis charging plasma alloying at surface of samples of Armco iron 20#, 45# and T8steels. 本文通过对工业纯铁、20钢、45钢、T8钢进行双层辉光离子W、Mo共渗,探讨了钢中含碳量的影响。
- The distribution of boron and alloy elements in the boronized layer on Armco iron, steel 45, tool steel Cr12Mo, Cr26Mo or stainless steel Cr18Ni9Ti has been determined by a newly developed analytical method GDOS. 用辉光光谱分析测出了纯Fe,45钢,Cr12Mo工具钢,Cr26Mo和Cr18Ni9Ti不锈钢的渗硼层中硼与合金元素的分布规律。
- In this paper, the diffusion coefficients of the ~(14)C in austenite of armco iron specimens vari-ously cold deformed were investigated by using the radioisotope technique, and it was autora-diographed on the carburization surface layer. 采用放射性同位素技术测定了在渗~(14)C过程中~(14)C在不同量室温形变工业纯铁奥氏体中的扩散系数,并对渗层进行自射线照相。
- low carbon electrical steel and Armco iron 低碳电工钢和阿姆科铁
- Keywords Armco iron;ion nickelizing;magnetism; 工业纯铁;离子渗镍;磁性;
- Napoleon conquered by the force of an iron will. 拿破仑攻无不克靠的是坚强的意志。
- It will take weeks to get all the wrinkle iron out. 解决这些难题得要几周时间。
- Have you any scrap iron knocking about? 你那儿有散在各处的废铁吗？
- Laser heat treatment on nitrogen ion-implanted ARMCO iron specimens 纯铁离子注氮后的激光热处理
