您要查找的是不是：
- The Ti-Ru anode voltage was measured during the electrolytic process. 测量了电解过程中钛涂钌电极的阳极电位。
- With the anode voltage and the cathode current changing,the variational process of the electron velocity ratio and spread is simulated,and the results of the average velocity ratio 1.1 and spread 9.5% are obtained. 在阳极电压和阴极电流变化的条件下;对电子速度比和速度零散随之而变化的情况进行了模拟;得到平均速度比1.;1和平均速度零散9
- The results show that the anodic reaction is rapid and the current increases quickly and the specimen's surface is bestrewed with arc discharge when the anodic voltage exceeds 170V. 结果表明：氧化过程存在一个明显的临界电压值(170V)，在电压大于170V阳极氧化反应剧烈、氧化电流增大、试样表面出现弧光放电。
- Dependence of the Pore Diameter of the Alumina Film with Nano-Pore Structure on Anodizing Voltage 氧化铝薄膜纳米孔的孔径对电解电压的依赖性
- Keywords alumina film;anodizing voltage;internal stress;micro-crack;pore diameter; 氧化铝薄膜;电解电压;内应力;微裂纹;孔径;
- Its voltage has not been exceeded. 它的电压没有超过。
- anode voltage stabilized camera tube 高速电子束摄象管
- anodizing voltage 阳极化电压
- With Anodizing experience is prior. 有阳极氧化经验者优先考虑。
- Chun Kwong Metal Products Anodizing Ltd. 真光五金製品氧化有限公司。
- Note the polarity of the voltage drop across R. 注意R上电压降的极性。
- AC anodizing technology with decreasing voltage for aluminium alloys Containing copper or silicon and affecting factors were investigated. 较详细地介绍了采用降压后的交流电市电对含铜或含硅的铝合金的阳极氧化方法和影响因素。
- It is fed into the grid at this voltage. 它是以这种电压馈入电力网。
- Effects of Anode Voltage on Medical Titanium Material by Microarc Oxidation 阳极电压对医用钛材微弧氧化的影响
- The current lags behind the voltage. 电流滞后于电压。
- The following procedure is for anodizing aluminum parts. 下面是介绍零部件的铝阳极氧化的流程。
- To apply a small voltage to(a grid). 向栅极加偏压
- To start, lets take a look at a fairly advanced anodizing line. 先看看一个比较完整的阳极化设备。
- That is how voltage is measured. 那就是测量电压的方法。
- An easy protection method before the hard anodizing was developed. 试验表明，硬质阳极氧化后铬酸阳极化膜层的耐蚀性能良好。
