您要查找的是不是：
- However, manifolding may not be adequate if ambient temperature conditions do not yield sufficient heat flow or product vapor pressures within the containers. 但是，如果周围温度条件不能产生足够的热流或容器内的蒸气压，并联就没有作用了。
- ambient temperature condition 常温条件
- Another ambient temperature sensor is the vapor-filled bellows. 另一种空气温度传感器是充气波纹管。
- Hot cracks refer to the liquid condition, whereas cold cracks are generated in the solid condition, generally at ambient temperature. 热开裂指在液态下产生裂缝，而冷开裂是在固态条件下，一般在环境温度下形成的裂纹。
- REPAIR HE OPEN AMBIENT TEMPERATURE SENSOR SIGNAL CIRCUIT. 修理开路的周围温度感知器信号电路。
- Film form-ing mechanism of ambient temperature blackening. 并重点对常温发黑、化发黑、化发黑的成膜机理、层性能特点及应用情况作了说明。
- The ambient temperature under installation should not below00 C. · 电缆敷设时环境温度应不低于00C。
- An ambient temperature cross-linkable emulsion was described. 介绍了一种可室温交联乳液。
- Another ambient temperature sensor is the vapor-filled bellows . 另一种空气温度传感器是充气波纹管。
- Shelf life at ambient temperature, says Madsen, is two years. 货架期在常温下说，马德森，为两年。
- MQ silicone resin cured at ambient temperature was synthesized by the hydrolysis of sodium silicate, tetraethoxysilane and trimethylethoxysilane in acidic condition. 以硅酸钠、正硅酸乙酯、三甲基乙氧基硅烷为主要原料,通过酸性条件下的水解反应,制成室温固化的MQ硅树脂。
- Alters that a high temperature condition has occurred and shuts down heater. 改变出现的高温环境,并且关闭热水炉。
- When the ambient temperature rises, the charge efficiency increases. 环境温度升高,充电效率增加。
- Free from the influence of ambient temperature,it is stable and reliable. 不受环境温度影响，稳定可靠。
- It is important that the ambient temperature for DIRC-5 is between 0 and 30 . 这是非常重要的环境温度为dirc - 5介于0和30 。
- Repeat the zeroing process whenever the ambient temperature changes. 每当环境温度变化时，都要重复消零操作。
- Keep Cold storages and Ambient Temperature warehouses are clean and in order. 负责保持胰岛素冷库和常温仓库干净整洁有序；
- To examine the tested sample for any appearance change under a low temperature condition for a period of testing time. 用使产品在低温中保持一段时间的方法检查产品的外观是否变形
- Torque values apply to clean fluid at ambient temperatures. 扭矩值适用于常温下的清洁液体。
- Finally, the spray characteristics of the atomizer under the high temperature condition are forecasted theoretically. 最后本文在理论 上对高温情况下喷咀模型的雾化特性进行了预测。
