您要查找的是不是：
- The deaggregation effect of three kinds of dry powder inhalers with different air inlet angles was investigated using salbutamol sulphate as a model drug through the test in vitro. 以硫酸沙丁胺醇粉雾剂为模型药物,通过体外试验比较3种不同类型干粉吸入器的分散效果。
- Effects of the air inlet angle and jet number on mixing flow in the afterburning chamber of solid rocket ramjet 喷口数与进气道角对固冲发动机补燃室气流掺混的影响
- air inlet angle 气流进入角度
- RAM AIR INLET MECHANICAL LINKAGE. 冲压空气进口机械连杆机构。
- Remove the air inlet hose from the throttle body and air cleaner. 从节流阀体和空气滤清器上拆下气流入口软管。
- Turn off supply pressure and observe float drop to open air inlet. 关闭供应压力,观察浮子下降,因此开启空气进口。
- Check found birdstrike on radome and R engine air inlet. 雷达罩和右发进气道口有鸟击痕迹。
- Air inlet throttle valve with pneumatic actuator and positioner. 空气进气节流调节阀：带有气动定位和执行机构。
- Connect the air inlet hose to the throttle body and the air cleaner. 将空气入口软管接至节流阀体和空气滤清器。
- The influences of the inlet angle and inlet total pressure of fluid on the temperature of electrode surface and nozzle exit fluid was analyzed. 分析了空气进口气流角、进口总压和等离子化学反应对电极壁面温度及喷嘴出口气流温度的影响。
- The matching between the guide vanes outlet angle and the runner inlet angle, the relationship between the outflow angle of the guide vane and the inflow angle of the runne. 计算了3种不同比转速水轮机对应导叶高度下的导叶和转轮的耦合流动,分析了活动导叶出流角与转轮进水角的匹配关系,活动导叶出流角和转轮进水角与活动导叶几何出水角的关系。
- Slowly open vent needle valve just as air inlet opens. Record differential pressure. 当空气进口开启时,慢慢开启排气针形阀。记录压差。
- Slowly open needle valve "C" bypass (yellow) just as air inlet opens. Record differential pressure. 正当空气进口打开时，慢慢开启针形阀“C”旁路（黄）。记录压差。
- Separation of the water supply from the air inlet is accomplished by means of a diaphragm seal. 供水与空气的隔离是通过采用隔膜密封的方法实现的。
- Next, let's make the simple panel under the air inlet that we can find on the side. 接下来，让我们作一个简单小组根据空气进说，我们能够找到对的一面。
- Separation of the water supply from the air inlet is accomplished by means of a diaphragm seal . 水供应与空气进口的分离通过隔膜密封的方法实现。
- Requirement: Air inlet must start to open when supply pressure is 1.0 PSI or above. Air inlet must be fully open when supply pressure is atmospheric. 要求：当供应压力达到或超过1.;0PSI时，空气进口必须开始打开。当供应压力达到大气压力时，空气进口必须完全打开。
- The valve shall be constructed with a molded diaphragm separating the air inlet from the potable water supply to prevent spillage. 这种阀门应该配置一个模压隔膜，将空气进口与饮用水供水管道隔离开来，以防止泄漏或溢出。
- Study at vane inlet angle of double suction pump 双吸泵叶轮叶片包角的研究
- The test results indicate that the heat transfer rates of the test coils increase with air inlet velocity and fin numbers. 由实验数据得知湿盘管总热传量中，潜热量的变化占了大部分。
