您要查找的是不是：
- SANTANA Cylinder Head and Air Intake Manifold 桑塔纳气缸盖及进气歧管
- air intake manifold 进气歧管
- The main difference is how they move air to the intake manifold of the engine. 这三种形式主要的不同在于它们把空气引入吸气导管的方式。
- Remove intake manifold, yoke retainer and aligning yokes. 拆下进气歧管、叉臂轭护圈，并对正叉臂轭。
- This thesis mainly carries on research of three dimensional surface reconstruction of variable intake manifold and air fluid simul. 可变式进气歧管能提高进气效率,是发动机低转速时能提高缸内负压的可变机构。
- Direct gasoline injection and hydrogen intake manifold supply. 直喷式汽油和氢气进气歧管供应。
- When there is vacuum in the intake manifold, the vacuum holds the diaphragm up. 当进气歧管有真空存在时，真空便向上吸引膜片。
- Water will auto refill untill the air intake hose can't intake air. 瓶内的水就会自动加入缸内，直到进气喉不能在进气。
- “Air intake manifolds on SUVs use more plastic than the same part on a smaller car,” Smith said. “进气歧管上的SUV使用的塑料相同的部分比上一个较小的汽车， ”史密斯说。
- Applications:Measure absolute pressure of the intake manifold whose pressure is about 0.1 bar as well as the inlet air temerature provide load information for the engine automatically determine altitude in accordance with the volume effect. 组成和原理：这个传感器由两个传感器即进气歧管绝对压力传感器和进气温度传感器组合而成，装在进气歧管上。
- Recently Atkinson cycle has been used to describe a modified Otto cycle engine in which the intake valve is held open longer than normal to allow a reverse flow of intake air into the intake manifold. 最近阿特金森循环被用来形容一个修改奥托循环发动机在进气门举行开放时间比正常的容许摄入量空气进入进气歧管反向流动。
- To reduce the air intake of(a carburetor), thereby enriching the fuel mixture. 阻塞气门减少进入汽化器的空气以得到更浓的燃料混合物
- The pudding results from the failure of all the fuel to vaporize and from the sorting effect of the intake manifold. 积洼是全部燃料蒸发得不充分和进气歧管类似影响的结果。
- The air intake might be clogged, so there is fuel but not enough air. 空气吸入口被堵塞了，因此引擎吸入燃料，但没有足够的空气（用于燃烧）。
- If the engine backfires, the sudden pressure in the intake manifold forces the valve back. 如果发动机回火，进气歧管骤增的压力就迫使阀门向后移动。
- The Tornado jet fighter-bomber has two air intakes. 旋风式喷气轰炸机有两个空气入口。
- Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold). 安装进气歧管（见单元11-排气系统和进气歧管）。
- Remove the intake manifold (refer to Group 11, Exhaust System and Intake Manifold). 拆下进气歧管（见单元11-排气系统和进气歧管）。
- Shut down non-essential air intakes. 关闭非重要的空气进口。
- On a typical in-line six-cylinder engine the carburetor is located on the intake manifold between cylinder 3 and 4. 在标准的六缸直列式发动机上，化油器被设置在进气歧管上3号和4号缸之间。
