您要查找的是不是：
- adjusting screw rod [化] 调节螺杆
- Loosen the adjustment screw, and adjust the length of the link rod. 请拧松调整螺丝，拔出或插入连接杆进行调整。
- The high step moves from under the adjusting screw. 使高点从调节螺钉下移动。
- The adjusting screw rests on the high step of the cam. 调节螺钉落在凸轮高点上。
- To Readjust- Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- To Readjust - Loosen lock nut on the adjusting screw. 重新调节：松开调节螺丝上的锁定螺母。
- adjustment screw rod 调节螺杆
- Remove compression from spring by turning adjusting screw (1) counterclockwise. 通过反时针方向旋转调节螺丝(1)从弹簧上拆卸压缩件。
- Heavy duty adjusting screw. Adjusting screw is both slotted and knurled. 重型调节螺丝。调节螺丝既有槽也有花纹边。
- Complete stoppering of the vials usually by hydraulic or screw rod stoppering mechanisms installed in the lyophilizers. 使用安装在冻干机内的液压装置或螺杆全加塞。
- Remove adjuster lever, adjuster screw and spring. 拆卸调整器杆，调整器螺丝和弹簧。
- J. Vertical Shaft Fine Adjustment Screw. 垂直杆微调螺丝.
- To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
- To replace seat/stem module shut off supply, loosen locknut and back off adjusting screw. 要更换阀座/阀杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
- Bolts of a clutch screw press (CSP) boar weight of screw rod and slide of the CSP, balance the down-pushing force of return cylinder and balance strong impact load during the braking of the slide. 某离合器式螺旋压力机的预紧联接螺栓，承受着螺杆和滑块重量、平衡回程缸下推力以及滑块回程制动期间较强的冲击力。
- To clean or replace parts; shut off supply, loosen lock-nut and back off adjusting screw. 如果要清洗或更换部件，关闭供应管道，松开锁紧螺母，退出调节螺丝。
- Two adjusting screws harmonise the guns with the sight. 有两个调节钮来校准武器和瞄准具。
- Turn adjusting screw (1) clockwise to increase the delivery pressure, counterclockwise to lower it. 顺时针方向旋转调节螺丝(1)以增加输出压力，反时针方向旋转降低输出压力。
- Tighten adjustment screw to 3 N·m (30 in-lbs) torque. 拧紧调整螺丝到3 N·m (30 in-lbs)扭力。
