您要查找的是不是：
- The result shows that the strength, especially elongation, of adjusted pressure casting sample is increased dramatically under the same conditions of melting and heat treatment. 结果表明,在相同的熔铸工艺和热处理条件下,调压铸造试样的强度,特别是延伸率得到大幅度提高。
- Research on Filling Capacity of Adjusted Pressure Casting of Magnesium Alloys 镁合金调压铸造充型能力的研究
- adjusted pressure casting 调压铸造
- Enhancement of the Adjusted Pressure Casting Technique on the Mechanical Property of Aluminum Alloy Castings 调压铸造技术对铝合金铸件性能的改善
- Adjust pressure casting 调压铸造
- Selfmade pressure casting manifold,tank,pump. 自产压铸阀块、齿轮泵、油箱、60%25出口。
- Elongation of Al casting can be more than 10% by means of counter pressure casting,in which alloy composition and impurities contents are closely controled, and heat treating procedure is adjusted. 采用差压铸造压力场铸造工艺，对合金成分和杂质含量作严格控制，加上热处理工艺的调整，可以使铝铸件的延伸率＞10%25。
- The balanceable position is a relative response of the adjusted pressure, supplied by pilot system, forced on one side of diaphragm. 其平衡位置与来自导压系统作用于隔膜一侧(阀体下游出口侧)的调整压有对应关系；
- The improvement of casting process was conducted to eliminate the defects in F3 cylinder cap in low pressure casting. 针对低压铸造F3汽缸盖出现的铸件缺陷,在铸造工艺上进行了改进。
- Selectable spring ranges to allow for accurate, easy to adjust pressure setting. 可选择弹簧作用范围,以便更精确、更容易地调节压力设置。
- The technology of medium-high pressure casting to form the sanitaryware body is the up-to-date one in the world today. 卫生陶瓷中、高压注浆成形工艺是当今世界卫生陶瓷成形的最新工艺。
- The graphite particulate-aluminium matrix composites are developed by compocasting followed by pressure casting. 用复合铸造及压铸法制备了石墨颗粒铝基复合材料。
- The newly developed modular designed cup pressure casting plant TDA 50 for the production of complex cup shapes. 此套杯具设备是专为造型复杂的杯具成型而设计。
- The principle of vacuum pressurizing casting technique is introduced in detail. 论述了真空增压铸造技术原理。
- Production Type: Casting pattern, qravity pouring Pattern, low-pressure casting pattern, Pressure casting pattern, Waxen pattern, Die-casting. 产品种类：铸造模具、重力浇注模具、压铸模具、低压铸造模具、失蜡铸造模具、冲压模具。
- ALUMINUM DIE CASTING MOLDS.2.GRARITY CASTING MOLDS.(PERMAN ENT MOLDS)3.LOW PRESSURE CASTING MOLDS.4.PLASTIC INJECTION MOLDS. 5.CORE BOX. 压铸模2.;重力铸造模3
- Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting. 通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。
- This paper deals with the flowing phenomena of liquid metal in lift tube,crucible,and mould cavity in low pressure casting. 分析了低压铸造中液态金属在升液管、坩埚、型腔中的流动现象。
- The pressure casting process of oval platter was narrated,snd the requirements for plaster mould were given in this paper. 叙述了鱼盘压力注浆成形的过程和结果，列出了对石膏模型的要求。
