您要查找的是不是：
- The temperature rise near explosive welding interface is caused by explosive adiabatic compression and abnormal energy deposition. 摘要爆炸焊接界面附近温升是由爆炸绝热压缩和畸形变形能沉积两者造成的。
- The results show that the strain at stagnation point is infinite, and stra in saltaion is completed in fivefold jet thickness at explosive welding interface. 计算结果表明,爆炸焊接驻点的应变为无穷大;在驻点附近5倍射流厚度范围内应变完成了突变。
- Throughcalculation of temperature rising callused by them, melt criterion is given, the thickness of melted layer near explosive welding interface with small collision angle is estimated.4. 通过计算绝热压缩温升和畸变形能沉积产生的温升，给出熔化判据，定量估计出了在小碰撞角下爆炸焊接界面熔化层厚度。
- Weld interfaces must contact well each other during assembling, and remain perpendicular to the vertical line to minimize deform and displace... 吊装时尽可能使焊接面与中垂线相互垂宜，减少环、片之间的变形和位移，保证焊缝的气密性；
- CALCULATION OF IMPACT PRESSURE IN EXPLOSIVE WELDING INTERFACE 爆炸焊接界面碰撞压力的计算
- Effect of Weld Interface on Time-dependent Fracatrue Mechanics Parameters 焊缝界面对蠕变断裂力学参量的影响
- Some metals weld better than others. 有些金属容易焊，有的不容易焊。
- Can you give me an explanation of the man-machine interface? 你能给我解释一下人机接口吗？
- On reaching welding heat, the metal surfaces are pressed together. 当金属表面达到焊接热度时就会压在一起。
- Study of relationship between characteristics of overlaying welding interface and crack formation 堆焊界面特征与裂纹形成之间的关系研究
- Some of the students are welding capacitor; the others resistor. 学生中的一些人在焊接电容，另一些人在焊接电阻。
- Microstructure and Properties of Solution-Diffusion Welding Interface for Iron and Steel Materials 钢铁材料溶解扩散焊界面组织及性能
- Some of the students are welding capacitors; the others resistors. 学生中的一些人在焊接电容，另一些人在焊接电阻。
- Effects of Deformation Weaving of Friction Welding Interface to Feed and Upsetting Rate 工进和顶锻速度对摩擦焊接面形变织构的影响
- It takes speed and skill to weld steel at this heat. 在这样的温度焊钢需要速度和技术。
- EFFECT OF MATERIAL STRENGTH ON FORMING PROCESS OF EXPLOSIVE WELDING INTERFACE WAVE 材料强度在爆炸焊接界面波形成过程中的作用
- Microstructure and Element Diffusion in Welding Interface of Mg/Al Active Dissimilar Materials Mg/Al活性异种金属焊接界面微观结构及元素扩散的研究
- It take speed and skill to weld steel at this heat. 在这样的温度焊钢需要速度和技术。
- Poor wetting would produce voids at the interface. 浸润不良会在界面上产生孔隙。
- Keywords ZrO 2 Active solder Braze welding Interfacial reaction; 活性钎料;钎焊;界面反应;
