您要查找的是不是：
- WEDM of Injection Mold Insert 注射模镶件的线切割加工
- Design of Injection Mold for the Plastic Parts. 带螺纹塑件注射模设计。
- The development of injection mold software. 注射模软件的三个发展阶段。
- This study is devoted to investigating the use of the Be-Cu alloy mold insert in plastic injection molds for aspheric optic lens. 本研究探讨铍铜材料用于射出成型模仁的适用性评估及非球面镜片射出成型制程技术。
- Extensive knowledge of Injection mold structure and manufacturing flows. 丰富的模具构造经验和熟知生产流程。
- The structure and shaping characters of injection mold with long core get analyzed. 分析了一种型芯较长的注射模结构及成型特点。
- Design and manufacture methods of injection mold for the defecator body were introduced,and working process of mold was stated. 介绍了清净管体注射模的设计与制造方法,并阐述了模具的工作过程。
- The design steps of injection mold for the shaver frame were introduced in detail,mainly introduced the slide core-pulling mechanism. 详细介绍了剃须刀头架注射模设计过程,重点介绍了滑块抽芯机构设计特点。
- A pair of injection mold structure of transparent fittings on electronic balance (weighing device) designed for Japanese company is introduced. 介绍了一副为日本公司设计的电子称上的透明镜片的注射模结构。
- Based on ANSYS,this paper illustrates how to design the structure of injection mold cavity with finite element analysis efficiently. 以ANSYS软件为基础,论述如何高效地利用有限元分析解决注塑模型腔结构的设计;
- The feasibility of virtual design of injection mold for automotive framework is discussd by using CAE software based on virtual modeling technology. 立足于虚拟造型技术,利用CAE软件探讨了轿车骨架注塑模具结构虚拟设计的可行性。
- Locating Action of the Magnet Metal on Plastics Injection Mold Insert Structure 磁性金属在塑料注射模结构中的定位作用
- The Computer Aided Design of Feed System of Injection Mold was investigated in this paper.The Feed System of different mold could be designed by means of this software. 介绍了塑料注塑模实用浇注系统的计算机辅助设计。使用该软件可设计不同形式的浇注系统。
- Upper and lower movement may be adjusted according to the height of injection mold machine.They have signal connection with robots to take up products accurately. 上下行程可以根据注塑机高度进行调整,与机械手信号连接,准确接住产品。
- Firstly, the structure of injection mold is analyzed by use of GT, mold parts are classified to 4 types of ones: cavity or core, mold plate, structure and standard parts. 首先运用成组技术基本原理,对注塑模具结构进行了分析,提出了模具零件按其功用可分为型腔型芯、模板、结构件和标准件等4类零件的分类方法。
- The structure and working principle of switching ware are introduced, the application of switching ware in opening process and rejecting mechanism of injection mold are analyzed. 介绍了开闭器的结构及其工作原理,分析了开闭器在注射模开模过程和推出机构中的应用。
- Moreover,comparing to traditional mechanical analysis,this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity. 以注塑模垫板的设计为例详细阐述,并与传统力学分析对比,为注塑模具的型腔设计提供了一种新方法。
- The Application of Mold Insert in WEDM Cutting 镶件在线切割加工中的应用
- This article first introduces the function and the application of MoldFlow and Pro/Plastic Advisor, then introduces the process of using Plastic Advisor to optimize the design of injection mold gates. 本文首先介绍了MoldFlow和Pro/Plastic Advisor的功能和应用,然后介绍了利用PlasticAdvisor对某制件进行了浇口优化设计的过程。
- Inject molding is an important way for plastic forming,and technological parameters have significant effect on the quality of injection molded parts. 注射成型是重要的塑料成型方式,成型中工艺参数对塑件质量有重要影响。
