您要查找的是不是：
- Keywords Titanium alloy particle;Osteoblast;Osteoprotegerin（OPG）; 钛合金颗粒;成骨细胞;骨保护素;
- Titanium alloy particle 钛合金颗粒
- EATR is simply a wolf in sheep’s titanium alloy armour. EATR 只是一只穿戴羊的钛合金盔甲的狼。
- It is the first time to adopt titanium alloy on domes interiorly. 在国内舰船上使用尚属首次。
- The casting can meet requirement of titanium alloy creep fixed treatment. 研制出的铸件满足了钛合金蠕变定形处理的要求。
- Titanium alloy material (TC4) samples were treated with nitriding technique. 牙用钛合金TC4,使用渗氮表面技术处理。
- In situ titanium alloy matrix composites were fabricated by melting casting. 用熔铸法制备了原位自生钛合金基复合材料。
- Titanium Alloy Valve Retainer could help in reducing noise, friction, and vibration. 钛合金汽门帽可减低噪音、摩擦、震动。
- Under supergene conditions, aurosulfate complex, gold particle and gold alloy particle are the major forms for the transportation of gold. 在表生条件下,金硫代硫酸盐配合物、金粒子、金合金粒子是金迁移的主要形式。
- Titanium alloy blades artificial joints, golf heads face and auto connecting rod by precision forging. 钛合金精锻叶片、人工关节、高尔夫球头、打击面汽车连杆等。
- Based on the optimal process parameters, the ECAP processing of the Ti-6A1-4V titanium alloy has been carried out. 利用自行设计的ECAP模具，根据数值模拟确定的挤压工艺参数范围，实现了Ti-6Al-4V钛合金的ECAP变形。
- The hammer forging process of TC6 titanium alloy clasp has been simulated by using rigid-viscoplastic FEM. 在TC6钛合金卡环的高温锤锻过程中,模具承受非常大的应力。
- Abstract: In hot rolling of large rings of titanium alloy (LRTs), the ratio of roll radii R1/R2, i.e. 中文摘要: 在大型钛环热辗扩成形过程中，驱动辊半径R1与芯辊半径R2的比值R1/R2对变形区几何形状有重要影响，而后者对于获得高质量环件起着决定性的作用。
- The welding thermal elsto-plastic stress-strain cycle of titanium alloy was presented quantitively. 结果表明,钛合金焊接冷却过程中有卸载发生;
- The effects of laser transformation hardening (LTH) on the fretting wear of titanium alloy are investigated. 研究了激光淬火对钛合金微动磨损性能的影响。
- A new titanium alloy was treated by aging process,and the mechanical performance of the titanium alloy was studied. 采用时效强化工艺对新型钛合金进行了处理,并对其力学性能进行了研究。
- The fretting fatigue behavior of TC4 titanium alloy was investigated using a cylinder-plane configuration. 研究了TC4钛合金在柱面-平面接触条件下的微动疲劳行为。
- Titanium alloy is an important material for making a special kind of alloy steel. 钛合金是用来制造特种合金钢的重要材料。
- Weld configuration of TA12 titanium alloy is very good for electron beam welding(EBW). 采用电子束焊接TA12钛合金薄板焊缝表面成形良好,焊缝区以马氏体组织为主,细小的稀土相呈均匀弥散分布状态;
- Complete ODF analysis is thus made for the texture of a cold-rolled TA7 titanium alloy sheet. 按此法对实测的冷轧TA7合金板材完整ODF施行织构分析。
