您要查找的是不是：
- Cr or Cr - Ti alloy was used in vacuum evaporation. 以金属铬和铬钛合金进行真空蒸镀。
- Ti alloy is a most perspective material for oralogy due to its excellent mechanical properties and erosion resistance as well as biology compatibility. 钛具有优异的力学性能,良好的耐蚀性和生物相容性,已成为口腔医学中最有发展前途的金属材料。
- A new method is developed to deposit DLC film on surface of Ti alloy by liquid-deposition. 采用液相电解甲醇法，首次在钦合金表面沉积得到DLC膜。
- Fracture toughness test on Ti alloy BT20 and laser-welded joints was carried out. 摘要对BT20钛合金及其激光焊接接头的断裂韧性进行了研究。
- It indicates that wollastonite coating is tightly bonding to Ti alloy substrate. 相近的热膨胀系数使硅灰石涂层能与钛合金基体牢固的结合。
- The solid lubricant treated wheel was developed in order to improve the grindability of Ti alloy. 固体润滑剂渗渍涂层砂轮可以改善钛合金的磨削性能。
- WT5”BZ][ST5”BZ]High energy density electron beam is employed in surface rapid solidification on Ni plated Ti alloy. 采用高能量密度电子束进行了钛镀镍合金表面熔凝处理的研究。
- The WC-CO coating produced by electrospark deposition on Ti alloy can effectively improve substrate,s wearing resistance. 利用新型电火花强化技术,在钛合金材料表面强化WC-Co,可形成具有高耐磨性能强化层表面。
- This type of material includes Al alloy and Al-based composite, and recently the HSRS of Mg_based composite and Ti alloy is investigated. 高应变速率超塑材料主要是铝基复合材料及铝合金，最近，对镁基复合材料、钛合金高应变速率超塑性能的研究也已开始。
- The microstructure, properties and impact fracture toughness of welded joints of Ti and Ti alloy by using tungsten-argon arc welding were studied. 研究了钛及钛合金经钨极氩弧焊焊接接头的显微组织、力学性能和冲击断裂特征。
- In this paper, Influence of deposition condition on diamond-like carbon （DLC） films by liquid deposition on the surface of Ti alloy was discussed. 探讨了用液相电解沉积法在钛合金表面制备类金刚石薄膜的新方法。讨论了不同沉积条件对膜的影响。
- The properties of Ti alloy are mainly determined by com position and microstructure, which depend on the melting process of Ti alloy imm ediately. 钛合金具有比强度高、耐腐蚀等一系列优良特性，是新一代结构材料的代表。钛合金的性能很大程度上取决于合金的成分及组织。
- Diamond-like carbon films deposited on surface of Ti alloy can improve hemo-compatibility of Ti alloy and enhance the application as body-implanted materials. 在钛合金表面沉积类金刚石膜能改进钛合金的生物相容性，拓展其在人体植入材料中的应用。
- Microstructure characteristics of repairing welded joint of TA15 Ti alloy were analyzed by optics microscope, X-ray diffraction and electron probe microanalysis. 采用光学显微镜、X射线衍射仪和电子探针等测试手段分析TA15钛合金熔焊接头补焊微观组织特征,探讨钛合金焊缝多次补焊的可行性。
- Purpose: To investigate if the inlay Ti Alloy (stapling apparatus) cancause the local heat accumulation effect and the intestinal ambustion inwhole body microwave heating. 目的：探讨在全身微波加热中，内置钛合金(胃肠吻合器)是否会引起肠道组织局部热积聚以及肠道热灼伤。
- Liu D X, Tang B, Pan J D, et al.Investigation on glow-discharge ionized nickel-chromizing with arc source of Ti alloy and its properties[J].Materials Engineering,2000,(10):11-14. [1]刘道新;唐宾;潘俊德;等.;钛合金表面加弧辉光离子渗镍铬及其性能研究[J]
- The Mo-Ti gradient material was developed on the surface of Ti alloy substrate by electron beam smelting(EBS) technology based on analyzing the properties of Mo,Ti elements and Mo-Ti binary alloy phase diagram. 通过对Mo、Ti元素基本性质及Mo-Ti二元合金相图的分析,设计了Mo-Ti复合层,在钛合金基体上制备了Mo-Ti梯度材料。
- Based on the features of NC milling on Ti alloy curved faces, the geometric parameters of ball end mills for fluting on Ti alloy curved faces are optimized by using orthogonal test method. 根据钛合金曲面数控铣削加工特点，利用正交试验法优化钛合金曲面开槽用球头立铣刀的几何参数。
- Under the conditions of nitrogen-oil mixture, cooled nitrogen and cooled nitrogen-oil mixture, the milling force experiments on high speed milling of Ti alloy TC4 were contrastingly done. 发现低温氮气和低温氮气油雾相比常温氮气油雾能有效地降低铣削力，而低温氮气油雾的效用更加明显。
- The effect of process parameter on filling ratio of vertical centrifugal quick precision casting based on SL prototype for Ti Alloy was researched by casting experiment of grid specimens. 通过栅格试样浇注实验研究了工艺参数对基于SL原型钛合金立式离心快速精密铸造充填率的影响。
