您要查找的是不是：
- The size and shape of Sip also affected the mechanical properties. 初生硅颗粒的尺寸、形貌对Sip/ZA27的力学性能也产生影响。
- The article studies the mechanical properties of PTT staple fibers. 研究了PTT短纤维的力学性能。
- The mechanical properties of SCM whisker/HDPE composite were investigated. 摘要研究了矽钙镁晶须（SCM晶须）／高密度聚乙烯(HDPE)复合材料的力学性能。
- The prepolymerization of DAIP can make the mechanical properties of the castings get some improvements. 对DAIP进行预聚可使浇铸体的力学性能得到一定程度的改善。
- The mechanical properties of steel-fabre and its status and prospect of application is described in details. 对钢纤维物理力学性质及其应用现状及前景做了综合评述。
- Objective To observe the mechanical properties and the change shrinkage of microwave-cured denture base resins. 目的了解微波能加热处理义齿基托材料的力学性能和收缩变化。
- Also analyzed are the influences of CFRP ratio, angle steel ratio, slenderness ratio and eccentricity to the mechanical properties of the columns. 分析结果表明：含碳纤维布率和含角钢率越大，构件长细比越小，以及荷载的偏心距越小，复合加固效果越好。
- Quenching and aging have an important effect on the mechanical properties of AHS alloys. 淬火时效对合金最终性能有着重要的影响。
- As a result the mechanical properties of the cartilage are altered and resistance to deformation is lowered. 结果是软骨的机械性能发生改变，对变形的耐受力下降。
- The effect of acrylonitrile content on the mechanical properties of the copolymer was studied. 研究了共聚物中丙烯腈含量对其物理性能的影响。
- The effect of core-shell structure on the mechanical properties of PS/PA LIPN was systematically studied. 本文系统研究了核壳结构对聚苯乙烯/聚丙烯酸酯(PS/PA)LIPN力学性能的影响.
- Freezing and thawing actions greatly change the mechanical properties of soil by influencing its microstructure. 冻融作用对土的力学性质改变很大,而这又是源于冻融作用对微结构的影响;
- The results showed all of the mechanical properties of LFT-PET was better than those of SFT-PET. 并与双螺杆挤出机制备的短玻璃纤维增强PET(SFT-PET)进行了力学性能对比。
- The mechanical properties and the whiteness of the finished silk fabric were tested. 用正交分析法对整理工艺进行优化，得出最佳处理工艺。
- The mechanical properties of N 330 filled powdered SBR[P(SBR/N 330)]vulcanizates were studied. 研究了高耐磨炭黑(N330)填充型粉末丁苯橡胶??(SBR/N330)?萘蚧?旱奈锢砘?敌阅堋
- The mechanical properties of mixed powder specimens were nearly equivalent to the ASTM for the PM compacts. 混合粉末样品的力学性能几乎达到美国ASTM粉末冶金的标准。
- The mechanical properties of the binary blend systems of 1,2 - PBR (1,2-PBR/BR and 1,2 - PBR/SBR)were studied. 考察了钼系1,2-聚丁二烯橡胶(1,2-PBR)分别与丁苯橡胶(SBR)和顺丁橡胶(BR)两种共混体系的物理力学性能,借助透射电子显微镜(TEM)分析了两种共混体系的形态结构。
- The mechanical properties of the moisture-saturated UHMWPE3D/PMMA composites met needs. UHMWPE3D/PMMA吸湿平衡后的力学性能满足使用要求。
- The mechanical properties were also correlated withmicrostructure analyzised by means of XRD, SEM and EDS. 采用XRD、SEM、EDS等手段,研究了瓷胎的显微结构,及其与力学性能的关系。
- The mechanical properties of a skew girder bridge differ a great deal from those of an orthogonal girder bridge. 斜梁桥的力学特点与正交梁桥相比有很大区别。
