您要查找的是不是：
- Submerged Injection Processes 水下发射
- Injection process has a great influence on this new type of combustion. 在这种新型燃烧方式中，喷雾过程是重要的影响因素。
- Make proposals of the piece design in order to optimize the injection process. 提供产品设计建议来优化注塑工艺;
- The cored wire injection process was used to produce vermicular cast iron. 应用喂丝工艺生产蠕墨铸铁。
- Be responsible for analysis problem-solving of encapsulation injection process. 负责注塑工艺问题发现，分析及解决。
- The quality control of cored-wire injection process used for production of as-cast ferrite nodular iron was described. 摘要介绍用喂线球化工艺生产优质铸态铁素体球墨铸铁的质量控制要点。
- Working experience: 2-3years, experience with injection process control is preferred. 具有2-3年工作经验,具有注塑流程控制经验者优先。
- The injection process works by prematurely terminating a text string and appending a new command. 注入过程的工作方式是提前终止文本字符串,然后追加一个新的命令。
- The research is to apply FBGs to the injection molding by imbedding it right into the injection process. 本实验将光纤光栅于塑胶射出成型的浇注制程时，直接将光纤光栅埋到产品中。
- The flow fields of the injection process and the plastication process are discussed in det... 重点讨论了注射和塑化两个过程的流场。此研究工作可为注塑螺杆设计提供理论依据。
- The result showed that excellent and stable vermicularizing effect could be obtained by using cored-wire injection process to produce vermicular iorn. 结果表明,喂丝法生产蠕墨铸铁,蠕化情况良好,蠕化率稳定。
- The effluent water increases slowly at the beginning of nitrogen injection process, then increases at a great speed sharply before gas breakthrough. 当气体注入压力一定时，液体流出量缓慢增加，气体突破之前伴随液量的突然增大；
- The principle,injection process and parameters of moulding for the super miniature and high precision optical pickup unit(OPU)in a laser head were presented. 介绍了激光头中的OPU零件注射成型的原理、注射工艺和与其相关的工艺参数,分析了OPU零件的生产工艺,论证OPU零件的注射成型技术的可行性。
- The formula of sulphoaluminate "S" instant-setting cement eusd in shut-off is introduced. The design of conducting and borehole sweeping tools and injection process are described. 介绍了硫铝酸盐“S”型瞬凝水泥干法堵漏时使用的配方，阐述了输送工具和扫孔钻具的设计以及灌注工艺技术。
- The submarine submerged to avoid enemy ships. 该潜艇潜入水下以躲避敌舰。
- The characteristics of the injection process for PMMA material are analyzed.A measure for design of the injection mould for the PMMA magnifiers is introduced. 分析了有机玻璃的注射工艺特点,并针对放大镜产品注射模设计中所采取的措施进行了介绍。
- Our ship was able to haul up just before it hit the submerged reef. 我们的船就在要撞上暗礁的时候停住了。
- Consult of common and epispastic PVC make a way, can obtain density through special injection process under 0.The special type of 6 is epispastic material. 参照普通发泡PVC的制法，可通过非凡的注射过程来获得密度低于0．6的特种发泡材料。
- Coastal land submerged during high tide. 受潮地，潮淹区涨潮时被水淹没的海岸
- Injection processing, to make handle of bicycle, baby carriage, electric tools and etc. 注塑加工,自行车、童车、电动工具等手把。
