您要查找的是不是：
- Silicon carbide foam ceramic 碳化硅泡沫陶瓷
- PREPARATION OF HIGH PERFORMANCE SILICON CARBIDE FOAM CERAMICS FOR FILTER OF MOLTEN METAL 金属过滤器用高性能碳化硅泡沫陶瓷的制备
- Silicon carbide foam ceramics 碳化硅泡沫陶瓷
- Keywords foam ceramic;silicon carbide;siliconizing;electric conductivity;compressive strength; 泡沫陶瓷;碳化硅;渗硅;电导率;抗压强度;
- Our main products are Silicon Carbide, Alumina Ceramic, Tungsten Carbide, and Carbon-Graphite Seal Rings. 我们的主要产品是碳化硅、硬质合金、碳石墨密封环和氧化铝陶瓷制品。
- The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic. 细晶、 裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。
- With active carbon and silicon carbide as sintering aids,the boron carbide ceramic materials were prepared by using vacuum hot pressing sintering. 以活性炭和碳化硅为烧结助剂,采用真空热压工艺,制备了碳化硼陶瓷材料。
- A trap usually contains a brick of heat-resistant ceramic (such as silicon carbide or cordierite) honeycombed with passages that are alternately blocked at opposite ends. 微粒捕集器通常包含一块蜂窝状结构的隔热陶瓷（例如碳化矽或堇青石），蜂窝结构内部通道的一端封死。
- A trademark used for an abrasive of silicon carbide crystals. 金刚砂一种碳化硅晶体磨料的商标名
- The Element hot zone is a self bonded silicon carbide. 这种硅碳棒的发热部是自发结合的碳化硅。
- The biocompatibility of silicon carbide (SiC) foam prepared by polymer pyrolysis combined with liquid infiltration-reaction process was evaluated according to China national standard GB/T16886. 摘要依据国家标准GB/T16886，评价了用“高分子热解结合可控熔渗反应烧结技术”制备的泡沫碳化硅的生物相容性。
- There is a protective coating of silicon dioxide on the silicon carbide. 在棒的表面有一层二氧化硅保护涂层。
- Ceramic joints between reaction-bonded silicon carbide (RBSiC) were produced using a polysioxane silicon resin YR3370(GE Toshiba Silicones) as joining material. 以一种聚硅氧烷类有机硅树脂YR3370(GE Toshiba Silicones)为连接剂,连接了反应烧结SiC(RB-SiC)陶瓷。
- The inner mechanical seal shall be constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face. 内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。
- Al2O3-ZrO2 foam ceramic filter was prepared by a new method of centrifugation at the pre-arrayed EPS template. Zeta potentials of the slurries at different pH were measured and the effect of solid content of slurries on the centrifugal time was analyzed. 通过在发泡聚苯乙烯模板内的离心成型方法来制备Al2O3-ZrO2泡沫陶瓷过滤器,测量了浆料在不同pH值下的Zeta电位,分析了浆料的固相含量对离心时间的影响。
- Production launch of silicon carbide particulate filters for the PSA Peugeot Citro?n Diesel vehicles. 2001年:开始为标致雪铁龙汽车集团的柴油机机车生产碳化硅过滤器。
- Based on the characteristic of microwave regeneration of the foam ceramic filter, a two-dimensional mathematical model for the regenerating process of the column-type foam ceramic filter was proposed. 根据泡沫陶瓷过滤体微波再生的特点，建立了一个适用于圆柱形过滤体的二维微波再生数学模型。
- silicon carbide ceramic matrix composites 碳化硅陶瓷基复合材料
- The open cell alumina foam ceramics were prepared by impregnating a polymeric sponge with aqueous ceramic slurry. 采用有机泡沫前驱体浸渍工艺制备氧化铝泡沫陶瓷。
- Production launch of silicon carbide particulate filters for the PSA Peugeot Citro? N Diesel vehicles. 年:开始为标致雪铁龙汽车集团的柴油机机车生产碳化硅过滤器。
