您要查找的是不是：
- rubber covered roll 包胶辊,橡皮套辊
- Antiflaming and antistatic high pressure wire spiral rubber hose is consist of an inner,a protectionlayer,middle layer,wire reinforcement layer,and a rubber cover. 阻燃抗静电高压钢丝缠绕胶管结构是由内胶层、内胶保护层、中胶层、钢丝缠绕层和外胶层组成。
- These electric wires are protected by a rubber covering. 这些电线用橡胶作防护层。
- Features include easy-to-remove Teflon covered rolls. * 贴合滚筒外覆坚硬铁弗龙钢材质，不易磨损，调整及拆卸容易.
- Sandwich rubber is a single layer of cellular rubber covered with a single outer layer of ordinary pimpled rubber, the thickness of the pimpled rubber not being more than 2mm. 海绵胶是在一块泡沫胶上加盖一层颗粒胶，该颗粒的厚度不得超过2公厘。
- Sandwich rubber is a single layer of cellular rubber covered with a single outer layer of ordinary pimpled rubber, the thickness of the pimpled rubber not benig more than 2 mm . “普通颗粒胶”是一层无泡沫的天然橡胶或合成橡胶，其颗粒必须以每平方厘米不少于10颗，不多于50颗的平均密度分布整个表面。
- CONSTRUCTION:Steel wire spiral reinforced layer, and wear resistant synthetic rubber cover. 结构：由钢丝缠绕骨架层和内外耐油、耐腐蚀合成橡胶组成。
- On the surface of the transmission drum are bare steel and rubber cover with shevron and diamond pattern. 传动滚筒表面有裸露光钢面，人字形和菱形花纹橡胶覆面。
- The wires must be insulated from touching each other,with a rubber covering. 这些金属线一定要用橡胶皮包起来,以免相互接触。
- Therefore, Sims' model is better for use to predict the rolling pressure. 后者可用于中厚板轧制压力的预报,指导实际生产。
- The 1912 battery had 12 small cells, each consisting of three plates in a small hard rubber jar with a soft rubber cover. 1912年的那只蓄电池有12个单体，每个单体由三片极板组成，装在小的带软胶盖的硬橡胶壳内。
- Through numerical calculation of the blooming process of four high aluminum foil rolling mill, the distribution law of the rolling pressure in the roll ga... 对某厂四辊铝箔轧机初轧工况进行了数值计算,求得了辊缝内轧制压力的真实分布规律,充分揭示了箔带轧制过程中非轧制辊面存在压靠的事实。
- The products are polyester thread structure and are produced by rubber cover sulfuration, which is an advanced craft in world. 产品采用聚酯线绳结构，胶套硫化的国际先进工艺。
- The wires must be insulated from touching each other, with a rubber covering. 这些电线必须用橡胶皮包住相互绝缘。
- This hose shall consist of an inner fube of oil resistant synthetic rubber,tow braids of steel wire reinforcement,and an oil and weather resistant synthetic rubber cover. 结构：软管由一层耐油合成橡胶内胶层，二层钢丝编织增强层和一层耐油候合成橡胶外胶层组成。
- Front Rubber-covered Roll Pressure 前胶辊加压
- Application: Dewaxing casting shell remove, highly hard metal sand process, rubber cover preprocess, casting black skin remove, stone, glass 3D carving and etc. 用途:脱蜡铸造壳之去除;高硬度金属砂加工;橡胶被覆前处理;铸造品黑皮去除;石材.;玻璃之立体雕刻等。
- Moreover,the mathe matic model of the piercer rolling pressure is analyzed by the writer. 分析了穿孔轧制压力的数学模型。
- The ejection-port cover rolled shut and there was a feeling like being shot from a cannon. 弹射口盖板回转关闭，之后就有种炮弹出膛的感觉。
