您要查找的是不是：
- The effect of radial load to radial stiffness can be neglected. 径向载荷的变化对轴承径向刚度的影响可以忽略.
- For applications where the axial load is heavier than the radial load (fig 7). 用于轴向负荷大于径向负荷的应用场合(图7)。
- The radial loads act at the pressure centres of the bearings (see dimension a in the product tables). 径向载荷作用于轴承的压力中心(见产品表中的尺寸a)。
- Type GC-D is a roller type freewheel non-bearing supported, Earrings are required to support axial and radial loads. GC-D系列为无轴承支撑滚柱式单向离合器。
- SKF flanged bushings are composite dry sliding bearings for radial loads and simultaneously acting single direction axial loads. SKF法兰轴套是用于径向负荷与同时作用的单向轴向负荷的复合干式滑动轴承。
- The same general equation also applies to spherical roller thrust bearings, which can accommodate both axial and radial loads. 相同的一般公式还适用于可承受径向和轴向载荷的球面滚子推力轴承。
- All other radial bearings can accommodate some axial loads in addition to radial loads; see "Combined load". 所有其它的径向轴承除了径向负荷外,还可承受一些轴向负荷;请参看“混合负荷”。
- Double row full complement cylindrical roller bearings with flanges on both the inner and outer rings can support axial loads in addition to radial loads. 内圈和外圈均带法兰的双列满滚子圆柱滚子轴承除径向载荷外,还可支撑轴向载荷。
- When the axial component of combined loads is large, it may be supported independently from the radial load by a separate bearing. 当混合负荷中的轴向负荷很大时,可以与径向负荷分开,由另外一个轴承独立支承。
- However, the radial load must not exceed 50 % of the simultaneously acting axial load. 但是,径向负荷不能超过同时作用的轴向负荷的50%25。
- If this is not the case, the alignment needle roller bearing must be subjected to an additional radial load. 如果不是这样,必须使对中滚针轴承承受额外的径向载荷。
- Spherical plain thrust bearings can carry a radial load Fr in addition to the axial load Fa. 球面滑动止推轴承,除轴向负荷Fa外,还能承受一定的径向负荷Fr。
- Tapered roller bearings are genrerally used tro support combined load mainly consisting of radial load. 圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷。
- Deep groove ball bearings mainly take radial load as well as take moderate axial load. 深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。
- Taper roller bearings are generally used to support combined load mainly consisting of radial load. 详细信息:圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
- Taper roller bearigns are generally used to support combined load mainly consisting of radial load. 圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
- Slewing ring bearing(slewing bearing), is a bearing that able to bear axial load, radial load and oveturning torque. 转盘轴承，又称回转支承，是一种能够同时承受较大的轴向载荷、径向载荷和倾覆力矩的大型轴承。
- Tapered roller bearings are generally used to support combined load mainly aonsisting of radial load. 圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷。
- The self-made convert structure radial-thrust hybrid bearings test stand can bear radial load, thrust load and both the two direction loads at the same time. 自制的径向-推力联合动静压轴承试验台采用倒置结构,可实现径向加载、轴向加载以及两个方向同时加载。
- These bearings can accommodate a certain amount of axial load in addition to the radial load, (see under "Equivalent dynamic bearing load"). 除径向负荷外,此类轴承还能承受一定的轴向负荷(见“当量轴承动负荷”)。
