您要查找的是不是：
- The hot dip Zn Ni alloy coating provides good anticorrosion performance. Two kinds of materials, Q235 and Q345 used for galvanizing Zn and Zn Ni alloy. 对Q2 35和Q345两种材料表面热浸镀纯Zn和Zn Ni合金 ,研究Ni对热镀锌耐蚀性的影响。
- In this paper,the nanoindentation method was used to measure micro-properties of the W alloy,the results were obtained in the case that tung-sten part. 采用纳米压痕试验的方法,在钨颗粒与基体不分离的情况下测量其微观性能,分析试验结果,解释宏观现象。
- A sealing technology of the holes in the hard anodizing film with the deposited W alloy was introduced to increase its hardness. 介绍了一种有效提高铝基硬质氧化膜硬度的电沉积钨合金封孔技术。
- Reflector: High temperature processed, layers of alloy coating films. 反射：高温处理后，合金涂层层薄膜。
- In this paper,the nanoindentation method was used to measure micro-properties of the W alloy,the results were obtained in the case that tung-sten part... 采用纳米压痕试验的方法,在钨颗粒与基体不分离的情况下测量其微观性能,分析试验结果,解释宏观现象。分析结果表明,在钨合金材料中,基体相并不是弱相,其对强度的贡献应重新认识。
- Process for Black Chromating of Zn Ni Alloy Coating 锌镍合金镀层的黑色钝化
- Analysis of tile service condition of P/M W alloy anvil is made.Some technical measures proposed here proye to be practical for improving the service life of the W alloy anvil. 探讨了粉末冶金所制备的钨合金砧块的使用条件，讨论中提出的有关工艺措施，对提高钨台金砧块的使用寿命，保证气门生产质量有着实际指导意义，并在生产实践中取得明显的经济效益。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. 研究了热浸镀 5 5%25Al Zn合金镀层钢的室温拉伸性能和耐蚀性能。
- The influences of heat treatment on structure micro hardness, static corrosion resistance in normal temperature and hot solution corrosion resistance of electroless Ni P and Ni Co P alloy coatings were studied. 研究了热处理对化学沉积Ni－P、Ni－Co－P合金镀层的组织结构、显微硬度、常温静态腐蚀性能和热溶液腐蚀性能的影响。
- The property of the coating is identical with electroplating Zn-Ni alloy coating in ammoniate. 对航空高强钢低氢脆电镀锌-镍合金工艺进行研究。
- The average microhardness of the laser clad silicide alloy coating ranges from HV650 to HV750. 涂层组织显微硬度在HV650-750之间,沿层深分布均匀;
- The results showed that the grain size and the corrosion resistance of the alloy coat on tinplate increased as the reflowing time exten... 结果表明,随着软熔时间的延长和软熔温度的升高,镀锡板合金层的晶粒度增大,镀锡板的耐蚀性增强。
- The corrosion resistance of the alloy coat on tinplate was directly related to the life span of the tinplate as a food packaging material. 镀锡板合金层的耐蚀性好坏直接关系到镀锡板用作食品包装材料时的寿命。
- Electroplated Cu-Sn alloy coating is good in decoration and solderability,low in cost,non-toxic,not irritable,etc. 电镀铜锡合金具有装饰性好、可焊性优良、成本低、无毒、不使人体过敏等优点,而得到广泛的应用。
- For2Cr13 valve sealing face by double glow plasma W alloying process,carburizing , quenching and tempering process, the results show its machining size is little, its hardness is high and its static pressure lifetime is long. 结果表明经双层辉光离子渗钨、渗碳和淬火回火处理的2Cr13阀门密封面加工量小、硬度高、静压寿命长。
- In this thesis, a Ni-W alloy coating was produced by electrodeposition on a cupreous substrate. 镍钨合金镀层由于其高的硬度、耐磨及耐蚀性而被作为代铬镀层用于金属表面处理。
- The white corrosion products on hot dip Zn Al alloy coating exposed to seawater in dynamic aerated immersion were investigated by means of XRD and TEM. 采用XRD和TEM对热浸锌铝合金镀层在动态充气海水全浸试验时所形成的白色腐蚀产物进行了研究。
- This paper describes material,equipment and processing of high frequency induction remelting technology for self fluxed alloy coating. 本文介绍了自熔合金涂层高频感应重熔工艺技术的设备、材料、工艺和应用效果。
- In English, b, p, m and w are bilabials. 英语中的b、p、m、w为双唇音。
