您要查找的是不是：
- The influences of heat treatment on structure micro hardness, static corrosion resistance in normal temperature and hot solution corrosion resistance of electroless Ni P and Ni Co P alloy coatings were studied. 研究了热处理对化学沉积Ni－P、Ni－Co－P合金镀层的组织结构、显微硬度、常温静态腐蚀性能和热溶液腐蚀性能的影响。
- Ni - P alloy coatings 镍磷合金镀层
- This paper deals with the adhesive state of amorphous Ni P alloy plating using impact fracture test method and also measuring the adhesive strength of the plating quantitatively. 用金相冲击断口法研究了化学沉积非晶态镍磷合金层与基体的结合状况，并用扭转法定量测量了化学沉积合金层的附着强度参数。
- Effects of Heat Treatment on the Structure and Behaviours of Electroless Deposited Ni-4.9%P Alloy Coating 热处理对化学沉积4.;9%25P 的镍磷合金层组织和性能的影响
- A Study on Fe Ni P Alloy Plating 铁-镍-磷合金电镀的研究
- The hot dip Zn Ni alloy coating provides good anticorrosion performance. Two kinds of materials, Q235 and Q345 used for galvanizing Zn and Zn Ni alloy. 对Q2 35和Q345两种材料表面热浸镀纯Zn和Zn Ni合金 ,研究Ni对热镀锌耐蚀性的影响。
- The amorphous Fe Cr alloy coatings were obtained by controlling the composition of bath operation conditions. 本实验通过控制镀液组成和操作条件获得了非晶态铁-铬合金镀层。
- Keywords electroplating;Ni P alloy;sodium hypophosphite; 电镀;镍磷合金;次亚磷酸钠;
- Ni-based and Co-based alloy coatings were made on the Q235 steel substrate by oxy-acetylene flame spraying and fusing. 采用氧乙炔火焰喷熔法在Q235钢表面制备了镍基和钴基合金涂层。
- Co-Ni alloy coatings were electrodeposited from a sulfate plating bath and sulfate plating bath containing sodium citrate. 分别在硫酸盐镀液和添加柠檬酸钠的硫酸盐镀液中电沉积钴-镍合金。
- The surface appearance and corrosion products of Zn-Mg alloy coatings with different content of Mg were analyzed by SEM and XRD. 采用扫描电镜和X射线粉末衍射,对含镁量不同的热镀锌镁合金镀层表面形貌和腐蚀产物进行了分析。
- It was shown that the two kinds of Fe-based alloy coatings were subjected to serious low temperature hot corrosion, which was characterized by accelerated oxidation. 试验结果表明，两种铁基合金涂层发生了较严重的以加速氧化为特征的低温热腐蚀。 两种镍基会金涂层具有良好的耐蚀性能。
- In this paper,a physical model about the effect of composition demixing between alloy coatings and alloy cathode material in multi arc ion plating is proposed. 提出了一种关于多弧离子镀合金涂层成分离析效应的物理模型。
- With laser cladding Co-base alloy coatings, the high temperature hardness and thermal fatigue resistance of H13 hot-working die surface were appreciably increased. H13热作模具钢表面经激光熔覆钴基合金后显著提高了模具的高温硬度和热疲劳抗力。
- The results showed that the grain size and the corrosion resistance of the alloy coat on tinplate increased as the reflowing time exten... 结果表明,随着软熔时间的延长和软熔温度的升高,镀锡板合金层的晶粒度增大,镀锡板的耐蚀性增强。
- The corrosion resistance of the alloy coat on tinplate was directly related to the life span of the tinplate as a food packaging material. 镀锡板合金层的耐蚀性好坏直接关系到镀锡板用作食品包装材料时的寿命。
- Chen BH.Hong L.Ma Y.Ko T M Effects of surfactants in an electroless nickel - plating bath on the properties of Ni - P alloy deposits 2002(41 刘新宽.;向阳辉
- Reflector: High temperature processed, layers of alloy coating films. 反射：高温处理后，合金涂层层薄膜。
- While the amorphous Ni P alloys is aged at higher temperature than 613 K, they crystallize to precipitate Ni 3P, so that the hardness and wear resistance of the coatings incerase and are superior to the crystal alloy; 经过大于613K的时效处理，非晶态镍磷合金晶化且有Ni3P生成，沉积层的硬度和耐磨性得以提高并超过晶态合金；
- Tin whiskers, growing spontaneously from Sn and Sn alloy coatings, can cause electrical shorts in the circuit and present a long-term reliability problem to the electronic industry. 锡须，一种自发从锡和锡合金层生长出来的现象，它会导致电路短路,影响电子产品长期的可靠性。
