您要查找的是不是：
- Design of Micro Lens Arrays Coupling with Fiber Arrays and Analysis of the Coupling Loss 与光纤阵列耦合的微透镜阵列设计与损耗分析
- Investigation on Focusing Performance of Tapered and Lensed Fiber[J]. 引用该论文 刘旭;陈麟;蔡纯;肖金标;张明德;孙小菡.
- In the thesis, we report the GaN vertical light emitting diodes with micro lens array and surface roughening. 在本篇论文中，主要是探讨垂直式氮化镓发光二极体在表面制作微米透镜阵列与表面粗化的制成技术与特性量测。
- Cynosure was the first with the CAP technology and micro lens array and I believe that is best approach to fractionalize resurfacing. 赛诺秀激光公司是首家使用CAP聚焦技术和微透镜阵列的公司，而我相信这是点阵的最佳方法。
- The lensed fiber is obtained by heating the fiber tip in a fusing splicer at present. 但是传统的高斯混合模型需要大量的训练语料，而且模型训练时间长；
- Tapered lensed fiber(TLF)can couples optical energy into PLCs integrated with spot size converter high-efficiently. 本文在深入研究、分析几种耦合方案的基础上,提出使用锥形透镜光纤(TLF)可以实现与带有模斑转换器的波导芯片的高效耦合。
- The goal of this study is to design a new method which can be used for manufacturing the elliptic lensed fiber. 在神经科学研究中，瞭解人类脑皮层结构和脑功能之间的关系是脑皮层对位的主要目的。
- In addition, for this newly designed lensed fiber, the graph of coupling efficiency vs. offset and eccentricity is given. 对于新设计的熔锥形透镜光纤，文章还给出了偏移和偏心与耦合效率的关系曲线图。
- To achieve higher coupling efficiency between laser diode and fiber, the hyperbolic-end lensed fiber is used.A coupling efficiency of up to 86% has been demonstrated. 在光纤与雷射之间的耦合采用本实验室自行研制高耦合效率双曲线型光纤透镜，实验证明此双曲线光纤透镜耦光效率可达86%25。
- The lensed fiber is obtained by heating the fiber tip in a fusing splicer at present.Before taking the fiber into fusing splicer, there are many procedures have to be checked. 成长奈米碳管的目的是为了降低碳-碳及碳-集电器间的接触阻力，使电容器在高速率充放电时，能维持高电容量；
- Major Products：Planar Lightwave Circuit Splitter, AWG-arrayed Waveguide Grating, PLC Variable Optical attenuator, Fiber Array, Fiber Accessories VOA Multiplexer. 主要产品：平面波导型光分路器、陈列波导光栅、平面波导型可调光衰减器、光纤陈列、光纤辅件、可调光功率波分复用器等。
- In order to obtain good beam quality and high coupling efficiency, the lensed fiber is used for the coupling between semiconductor laser and single mode fiber. 通过采用透镜光纤，不但能获得半导体激光器与单模光纤之间高的耦合效率，而且还能获得好的光束质量。
- Test and improvement of voltage divider system of PMT for large area scintillating fiber array detector at RIBLL terminal[J].Nuclear Electronics & Detection Technology（in press, in Chinese）. RIBLL终端大面积闪烁阵列探测器光电倍增管分压系统的测试与改进[J].;核电子学与探测技术（待发表）
- The goal of this study is to design a new method which can be used for manufacturing the elliptic lensed fiber.The lensed fiber is obtained by heating the fiber tip in a fusing splicer at present. 中文摘要本篇论文的目的在于设计一套制造椭圆透镜光纤的新方法，目前业界在制造透镜光纤都是将以成型的光纤头端至入光纤接机。
- LDA will be made of much more LD which is called LD Stack.If we remain used the coupling mode of fiber array, the results are laser-spot size will enlarge, and the brightness will descent. 国内在这一方向的研究还停留在试验阶段，今后我们工作的重点应放在LDA与单根的光纤耦合输出上，包括制备更高功率的LDA，设计更简单更有效的光束整形模块，以及研制具有高损伤阈值的传输光纤。
- These new techniqes contain dual H-CCD registers,the switching-resonance-driving method(SRD),a clamp-chip noise-suppression method (CCS),and micro lens technology. 阐述了解决这些问题的技术措施：双H-CCD移位寄存器、SRD法、CCS法及微透镜技术等。
- Many types of lensed fibers were used to test with the LD and the coupling efficiencies were increased over 30% comparing with the conventional LD. 将其与多种形式和规格的透镜光纤进行测试，耦合效率可以提高30%25以上。
- Abstract The structure of the large area scintillating fiber array (LASFA) detector and the characteristics of the scintillating fibers unit were described. 摘要 对大面积光纤阵列探测器中的光纤阵列探测单元的性能进行检测。
- crimp-and-cleave lensed fiber optic connector 压接-切割式透镜型光纤连接器
- crimp-and-cleave lensed fiber optic conn 压接-切割式透镜型光纤连接器
