您要查找的是不是：
- The article discusses three compositons in GRP such as glassfiber reinforcement,matrix resins and sixings. 本文就组成玻璃钢的三种主要材料：玻璃纤维增强材料、基体树脂和浸润剂分别进行讨论。
- GRP tensile strength mainly depends on warp and weft fibers in woven cloth,property of matrix resins and their combination. 玻璃钢拉伸强度主要取决于玻璃布经纬向的玻璃纤维和基体树脂的性能以及两者之间的组合状态。
- By mixing BMU-T with BMI in different ratio, a series of toughened bismaleimlde matrix resins and glass cloth reinforced laminates were prepared. 压制得到的玻璃布层压板具有良好的力学性能和电气性能。
- Find out the better formulation of the matrix resin and good processing technology. 找出了较好的基体树脂配方和良好的施工工艺。
- The effects of PP matrix resin, filler and compatibilizer on the property of the modified PP compound were discussed. 讨论了聚丙烯基体树脂、填充剂、相容剂对汽车灯罩用聚丙烯改性料性能的影响。
- Cyanate resin is a new advanced matrix resin owing to its excellent combinedproperties. 氰酸酯树脂以其优异的综合性能成为新一代高性能材料。
- Fiber and matrix resin material, by choosing different types of resin and fiber, and different products to meet the special requirements. 树脂和纤维是基体材料,通过选择不同类的树脂和纤维,来满足不同产品的特殊要求。
- RS-18, made by adding MU-65 and EPM-41 in traditional matrix resin, is a better prescription of the matrix resin of bonding agent in orthodontic. 在传统基质树脂配方中加入一定量的MU-65和EPM-41形成的RS-18是正畸用粘接剂基质树脂较佳配方的组成。
- Non-halogen flame-retardant cable was prepared with LLDPE/LDPE/(E/VAC) as the matrix resin and Mg(OH)2 as the major flame retardant. 采用线性低密度聚乙烯(LLDPE)、低密度聚乙烯(LDPE)、(乙烯/乙酸乙烯酯)共聚物(E/VAC)为基体树脂,Mg(OH)_2、微胶囊化红磷为主、辅阻燃剂,制备了无卤阻燃电缆料。
- Using PP as matrix resin,POE as toughener,activated talc as reinforcer, compound for back cover of refrigerator compressor is prepared. 以聚丙烯为基料,POE为增韧剂,活化滑石粉为增强剂,研制出了冰箱压缩机后罩专用料。
- The matrix resin,pigments,dispersants and the equipments used for the preparation of FEP masterbatch were discussed in detail. 重点讨论了制备聚全氟乙丙烯色母粒用载体树脂、颜料、分散剂及加工设备等几个方面的问题。
- PVB films for laminated safety glass were prepared by using PVB resin as matrix resin,different plasticizers and auxiliaries as additives. 采用胶片级聚乙烯醇缩丁醛(PVB)树脂为基础树脂,选用了不同的增塑剂和助剂,制成了夹层玻璃所用的膜片,分析了工艺流程中各原材料对产品质量的影响。
- The dispersion of the surface resistence was studied when solid and liquid antistatic agents were blended with the matrix resin. 还比较了固态抗静电剂和液态抗静电剂加人基体树脂中所得材料表面电阻率的分散情况。
- A new matrix resin for Nomex honeycomb XT 10 is introduced, The properties of the resin are studied, and the properties of Nomex honeycomb is also shown. 本文较为系统地介绍了模塑玻璃铜格栅的特性，生产成型工艺及其应用。简述了模塑玻璃钢格栅的发展历程和水平，对面临的问题进行了概括，并对其发展前景提出了一些看法。
- In-situ hybrid composite, a group of composites with a novel stiucture, consists of fibers, liquid crystalline polymer fibrils and a thermoplastic matrix resin. 新型结构的原位混杂复合材料由纤维、液晶聚合物微纤和热塑性基体树脂组成。
- In the article,matrix resin affecting mechanical performances of long glass fiber reinforced polypropylene (LGF-PP) prepared by in-line compounding were studied by the author. 采用在线混合设备制备了长玻璃纤维(LGF)增强聚丙烯(PP)复合材料(LGF-PP),研究了基体性质及界面相容剂对LGF-PP力学性能的影响。
- The title inorganic nano-hybrid polyimide films were prepared based on polyamic acid as the matrix resin, by the sol-gel process of traethoxysilane (TEOS) and isopropyl-aluminium. 摘要以聚酰胺酸作为基体，通过正硅酸乙酯(TEOS)和异丙醇铝发生水解缩合反应，然后与聚酰胺酸发生溶胶凝胶过程，从而制备出无机纳米掺杂聚酰亚胺薄膜。
- A new type of friction material has been prepared with carbon fiber and steel fiber as reinforcements and ring-opening polymerized phenolic as matrix resin. 采用碳纤维和钢纤维为增强材料、开环聚合酚醛树脂为基体,制得新型摩阻材料。
- The effect of the structure of matrix resins, processing method, pre-treatment of carbon black, post-treatment (annealing) of composites on conductive properties of LDPE/EPM/carbon black was investigated. 研究了基体树脂的结构、工艺方法、炭黑的预处理、复合材料的后处理 (退火 )等对LDPE/EPM/炭黑导电复合材料导电性能的影响。
- To improve the interfacial properties between Co_3O_4 particles and the matrix resin and to prevent the nano-particles aggregating, the surfaces of Co_3O_4 particles were treated by grafting BMA on them. Co3O4粒子表面采用接枝处理的方法接枝上甲基丙烯酸丁酯来改善纳米粒子与有机树脂的界面性能和防止粒子间的相互团聚。
