您要查找的是不是：
- Sludge granulation and treatment of low strength wastewater at normal atmospheric temperature are tow basic characteristics of ASBR. 形成颗粒污泥和可以在常温下处理低浓度废水是厌氧序批式反应器的两个基本特征。
- The treatment of low strength wastewater under mesophilic temperatures was investigated in an anaerobic baffled reactor inoculating with anaerobic floc sludge. 接种厌氧絮状污泥,采用厌氧折流板反应器在中温下进行了处理低浓度废水的试验研究。
- Keywords UBF;low strength wastewater;start-up; UBF反应器;低浓度废水;启动研究;
- Keywords low strength wastewater;facultative biochemical;dynamic model; 低浓度污水;兼性生化;动力学模型;
- Operational Characteristics of Anaerobic Baffled Reactor Treating Low Strength Wastewater 厌氧折流板反应器处理低浓度废水运行特性试验
- Keywords low strength wastewater;domestic sewage;anaerobic treatment;misapprehension; 低浓度;生活污水;厌氧技术;机理;认识误区;
- Keywords ABR;Low strength wastewater;Sludge characteristics;Temperature;Alkalinity; ABR反应器;低浓度废水;污泥特性;温度;碱度;
- low strength wastewater 低浓度废水
- Major Problems of Up-flow Anaerobic Sludge Bed Applying in Low Strength Wastewater of the Lower Temperature and the Countermeasures 上流式厌氧污泥床处理低温低浓度废水存在的问题与对策
- These materials exhibit low strength. 这些材料具有低强度。
- The influence of the temperature on the performance of UASB (upflow anaerobic sludge blanket) reactor treating low strength organic wastewater was studied. 摘要研究了温度因素对UASB反应器处理低浓度有机废水运行工况的影响。
- Flux entrapped in the joints is the principal cause of low strength or failure. 裂缝中封存有焊药是强度不足或断裂的主要原因。
- Controlled Low Strength Material (CLSM) is a self-compacted, flowable material. 可控制性低强度混凝土（CLSM）具备高度流动性以及自我填充之特性。
- When reassembling apply a drop of low strength thread lock to disc holder. 在重新组装时,将一个低强度螺纹装置锁到阀瓣支架上。
- For example, BH steel under low strength is pressed and baking finish to improve its strength of extension. 例如BH钢板是在低强度的条件下，经过冲压成形之后，进行烤漆加工热处理，以提高其抗拉强度。
- Gun Attack: This represents the early means of defeating your enemy's strength factor. It causes low strength damage. 舰炮攻击:这是打击敌人的早期方法。舰炮攻击较低地打击敌人的力量。
- A widely used sealed material, but because of its low strength, it's better to use with other filling together. 是一种应用广泛的密封材料，但因其强度低，与其它填料混合组装使用效果好。
- A specimen of large size would have lower strength than a small sp... 计算还表明脆性体的强度随微裂纹分布函数标准方差的增加而减小。
- ASTM D6103-97，2000，Standard Test Method for Flow Consistency of Controlled Low Strength Material（CLSM）. 内政部营建署，2002，控制性低强度材料（CLSM）产制及应用手册，第47页，财团法人台湾营建研究院。
- When replacing disc holder, apply a drop of low strength thread lock. Do not over torque. 当更换阀瓣支架时,轻微压下螺纹锁。不要过力。
