您要查找的是不是：
- The reasons for crack appearance in LPG spherical tank and the methods for prevention. 介绍液化石油气球罐检验中裂纹形成原因及预防措施。
- Problems on the System Design of LPG Spherical Tank 液化石油气球罐系统设计应注意的几个问题
- THE FRACTURE FAILURE ANALYSIS OF THE UNDER DRAIN FLANGE OF A LPG SPHERICAL TANK 某液化气球罐下排污管法兰断裂分析
- Analysis on the Ballooning Origin of Internal Wall of LPG Spherical Tank and its Countermeasures 液化石油气球罐内壁鼓泡的成因及防治措施
- ANALYSIS ON STRESS CORROSION OF SPV50Q STEEL LPG SPHERICAL TANK AND STUDY ON REPAIR TECHNOLOGY SPV50Q钢制液化气球罐应力腐蚀分析与修复技术研究
- Keywords SPV50Q steel;LPG spherical tank;Stress orientation hydrogen induced crack （SO-HIC）;Repair technology; SPV50Q钢;液化气球罐;应力诱导型氢致裂纹;修复技术;
- Test Research on the Stress Corrosion Cracking of LPG Spherical Tanks 液化气球罐应力腐蚀开裂试验研究
- LPG spherical tank LPG球罐
- LPG spherical tank area 液态烃球罐区
- In order to reduce possibility of LPG leakage accident, some suggestions were provided for design of LPG pressured tank (spherical tank). 从降低LPG泄露事故发生几率角度出发,针对LPG压力储存系统(球罐)的设计提出几点建议。
- The Application of the Water Spray Fire-extinguishing System in the Fire Fighting Design for LPG Spherical Tanks 水喷雾灭火系统在液化石油气球罐消防设计中的应用
- Taking the LGP spherical tank of high strength steel as an ohject. 球形储罐由于不断发生球罐开裂,泄漏事故,影响了球罐发展。
- The spherical tank (gas holder, container) will be shipped in the condition of edge prepared and bent plates. 球罐(气柜、容器)将以板加工和弯板的条件发货。
- It is important to assess the complex risk and hazards of fragment of spherical tank BLEVE quantitatively. 本文的研究结果对于定量评价球罐发生BLEVE之后碎片所造成的危险分析具有重要意义。
- During the process of heat treatment of a large spherical tank, the turbulent combustion will occur inside the spherical tank. 对球罐内部进行燃烧整体热处理时,因密度不均匀,使浮力对其内部流场有直接影响。
- Impact &fracture toughness properties of steel plate and welding joint of WEL-TEN610CF for natural gas spherical tank were investigated. 对特大型天然气球罐用WEL-TEN610CF钢板与焊接接头的冲击及断裂性能进行了试验研究。
- This paper presents the whole body heat treatment process and procedure of ammonia spherical tank and appraises the result of the heat treatment. 介绍建峰化工总厂化肥厂氨球罐的整体热处理工艺和过程，并对热处理效果进行评价。
- Using the front treatment program of the finite element method, the mechan-ics modeles of spherical tank and cylindrical tank are automatidy shaped on the screen or the plotter. 采用有限元前处理程序,自动生成常见球罐和柱罐的优化力学模型,并在屏幕上或用绘图仪绘制出罐体的三维图形,建立起受压容器开口补强优化设计的数学模型。
- The process of welding and heat treatment for spherical tank in special environment were stated in this article. Some relevant viewpoints and methods were also presented. 本文分析论述了球罐特殊环境(东北沿海地区、冬季施工)中焊接与热处理的有关问题,并提出一些有针对性的见解和做法。
- The necessarily of post-weld heat treatment of spherical tanks was emphasized. 强调了焊接球罐焊后热处理的必要性。
