您要查找的是不是：
- Metal Material Interface Bonding Property of Accumulative Rolling Bonding 金属材料累积叠轧焊界面的结合特性
- ULTRASONIC GUIDED WAVE METHOD FOR EVALUATING THE INTERFACE BONDING PROPERTY OF ULTRA-THIN TWO-LAYER COMPOSITES 超薄双层复合结构界面特性超声兰姆波评价方法
- Study on Interfacial Bond Properties and Microstructures of Low-Pressure Plasma Sprayed Coatings on Metal Substrates 金属基低压等离子喷涂界面的结合性能及微结构研究
- The effect of silane and titanate coupling agents on the interface bonding state and the mechanical properties of GRPFN (Glass Fiber Reinforced PF Nylon)has been studied. 研究了几种硅烷偶联剂、酞酸酯偶联剂对玻纤增强PF尼龙界面粘结状态和力学性能的影响。
- The effects of particle volume fraction, tensile rate and interface bonding strength on the properties of GB/HDPE composites were studied by tensile test and SEM observation. 通过GB／HDPE的拉伸实验和断口形貌分析，研究了颗粒体积分数、拉伸速率、界面强度对GB／HDPE复合材料力学性能的影响。
- The log decrement are suitable for determining interface bond damage. 对数衰减率适宜于测定界面粘结的破坏。
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- This decision is based, in part, on the tool's design, bond properties, material to be cut and machine power. 这一决定是根据在某种程度上对工具的设计、债券性质,可节省材料和机动力。
- The compositions, structures, bonding properties of the precursor, the HT-HP products and CN coating have been characterized by EDX, XRD, SEM and FTIR. 采用了X射线能谱(EDS)、X射线衍射(XRD)、扫描电子显微镜(SEM)、傅立叶变换红外光谱(FTIR)等分析手段,对所获得的前驱物、高压产物和碳氮(CN_x)涂层的成分、晶体结构和价键结构等性质进行了分析;
- The melting point is a mains quality index of heat melts adhesives.And the bonding properties are influenced by the melting point and melting range. 熔点是衬布用热熔胶的一项主要指标,对粘接性能的体现有着重要的影响。
- Research and development of interfacial bond property between synthetic fiber and concrete 合成纤维与混凝土界面粘结性能研究与发展
- Interface bonding strength of clad transition joints welded in two different welding procedures is compared and a proper welding procedure is determined. 对两组不同焊接规范下复合过渡接头的界面结合强度进行了对比，确定了合适的焊接工艺参数。
- The article discussed factors effecting the bonding properties of waterborne polyurethane laminating adhesives and studied the affecting patterns of these factors. 探讨了影响水性聚氨酯复膜胶粘接性能的各种因素,并对它们的影响规律做了初步研究。
- Butadiene-arylonitrile rubber was added to the homopolyvinyl acetate resin, modified its brittleness of low temperature ambient and bonding properties for plasties or rubber. 通过在均聚醋酸乙烯树脂中加入了腈橡胶以改善其在低温环境下的脆性和对塑料、橡胶等的粘接性能。
- The continuous, high strength and fast construction is the construction characteristics of RCC dam and also is the fundamental guarantee of interface bond quality. 摘要连续、高强度、快速施工既是碾压混凝土坝的施工特点，也是层间结合质量的根本保证。
- The relationship of interface temperature and interface bonding strength of aluminum alloy-steel transition joints in welding is analyzed through simulative heating treatment tests. 摘要通过模拟热处理试验，分析了焊接时界面温度与界面结合强度的关系。
- The compositions, structures, bonding properties and thermal stabilities of the precursor and the treated products have been characterized by elemental analysis, EDX, XRD, SEM, TEM, SAED, FTIR, TG. 采用元素分析、EDX、XRD、SEM、TEM、SAED、FTIR、TG检测手段，分析了前驱物以及脉冲放电产物的成分、结构、价键状态、热稳定性等方面的特性。
- High performance ferrocement laminate (HPFL) is a new type of inorganic material with a series of advantanges such as high strength,small shrinkage and good bonding properties,etc. 高性能水泥复合砂浆薄层(HPFL)是一种新型的无机材料，具有强度高、收缩小、与混凝土粘结性能好等一系列优点；
- Gypsum board to enhance network, applied to large-scale production of gypsum board needs a good bond positioning, and better water-soluble, with the gypsum board has a very good bonding properties. 石膏板增强网，运用于大面积石膏板生产需要，具有良好的粘结定位性，较好的水溶性，与石膏板有很好的粘结性能。
- In comparision with the bonding properties of glued air-dried China fir wood, a more satisfactory result can be obtained in green wood gluing by using PRF and RF glues, but not for UF and MF glues. 4. 3．与杉木气乾材之胶合性能相比较，PRF、RF进行杉木生材胶合，可获得较佳之结果，而UF、MF则否。
