您要查找的是不是：
- Install the ignition switch. 安装点火开关。
- Failure to do this can damage the ignition switch. 然后打开点火开关。不这样做便会损坏点火开关。
- Main Electric Circuit Ignition: Use the mouse pointer to turn-on the ignition switch on the dashboard. 主电路点火：使用鼠标指针，以投票就点火开关就在仪表盘。
- Insert the key in the ignition lock cylinder and turn the ignition switch to the On position. 将钥匙插入点火锁柱中，旋转点火开关到开启的位置。
- Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter programming mode. 通过将点火钥匙从点火锁匙中拔出退出设定程序；
- It can also be a mechanical interlock device that will not let the ignition switch turn to start if the car is in the gear. 同样，安全开关也可以是机械互锁装置，当汽车挂挡后不允许点火开关转到启动位置。
- Rotate the SKIM and its mounting bracket downwards and then to the side away from the steering column to slide the SKIM antenna ring from around the ignition switch lock cylinder housing. 向下旋动skim及其安装托架，然后向转向柱侧面旋转，将skim天线环滑动到点火开关锁柱插槽附近。
- REPAIR THE OPEN IGNITION SWITCH OUTPUT CIRCUIT. 修理点火开关输出电路断路。
- The ignition of the forest was caused by lightning. 森林起火是由雷电引起的。
- DISCONNECT THE IGNITION SWITCH 10-WAY CONNECTOR 拆下点火开关的10路接头。
- Install the timing chain tensioner. 安装正时链调整器。
- Install the valve bonnet. Torque to 70 ft./lbs. 安装阀盖。扭矩为70英尺/磅。
- Communicate with head office has been quicker since we install the fax. 自从我们安装了传真机，与总部的沟通更快了。
- Install the seat/shoulder belt anchor bolt. 安装座椅/安全肩带系紧螺栓。
- a key that operates the ignition switch of an automotive engine. 能够操纵自动发动机上的点火开关的栓。
- Install the distributor cap and wiring. 安装分电盘盖和电线。
- Install the hydraulic valve tappets. 安装液压气门挺杆。
- a key that operates the ignition switch of an automotive engine 能够操纵自动发动机上的点火开关的栓
- Install the screw in the trim panel depression. 安装饰板压低处的螺钉。
- USING A VOLTMETER MEASURE THE IGNITION SWITCH OUTPUT CKT AT FUSE #1 在15号熔丝上使用一个伏特表测量点火开关输出CKT。
