您要查找的是不是：
- Indicator Light Test 指示器灯光试验
- Light test capability: top, bottom and side. 能迎合顶面、底面或侧面放射的光电产品。
- Linda used her indicator light to show she wanted to turn left. 琳达打开方向灯，表示要左转。
- Dual Protection: Thermal cutout with indicator light and one time thermal fuse. 高科技毛细管过热保护装置及一次性热熔断保险丝双重保护。
- The indicator light is integral with switch cover and standardly furnished. 标准配置包括与开关盖一体化的指示灯。
- In Web and in load testing, smoke testing is short, light test. 在Web测试和负载测试中,冒烟测试时间短,工作量也小。
- Could not set the keyboard indicator lights. 无法设置键盘指示灯。
- We shouldn't go across the road until the indicator light turns green. 待指示灯变绿后，我们再过马路。
- Wait until the indicator lights up. 等指示灯亮了。
- Peak indicator light and LF (low frequency) switch per mono channel. 每路单声信道具有峰值指示灯及低频切除开关。
- Press down both green buttons until yellow indicator light stops flashing. 然后按住两个绿色安钮直到黄色指示灯不闪烁为止，
- Turn on the monitor. The indicator lights should be on as well. 打开监视器。提示灯亮。
- Placing the switch in the test position illuminates the indicator lights, and placing the switch in the dim position dims them. 将开关置于测试位照亮指示器灯光，将开关置于暗位来调暗灯光。
- The fuel tank indication light isn't working anymore. 油箱指示灯坏了。
- Display the progress of charge: the use of superposition circuit technology, charging indicator light changes. 充电进度显示方式：运用叠加电路技术，充电时指示灯变亮。
- In the ESD test on the CAN bus body system and equipments of bus, it appeared that some indicator lights worked abnormally when test voltage is advanced. 在对汽车CAN总线控制系统进行防静电测试中，出现了测试电压调高后部分指示灯工作异常的情况。
- With the Headset turned off,press and hold the Headset button for up to 10 seconds until the indicator light on the Headset flashes green and red.Then release the button. 在蓝芽耳机处于关闭状态之下按下蓝芽耳机按钮并保持10秒钟以上，直到蓝芽耳机上的指示灯号闪烁录色和红色再放开按钮。
- When the main system detected any abnormality, the indicator light shall then be turned on and go alarmed to reflect the abnormal status. 当本机自动侦则到异常时,状况指示灯亮显示异常状况并报警。
- Alarm sound continually, mean while the yellow indicator lighting long time. 连续鸣叫,且黄灯长亮。
- Normally the oil surrounding the probes is nonconductive, and the control and seal leakage indicator light will be de-energized. 通常情况下，环绕探头的油是不导电的，此时控制装置和密封泄漏指示灯处于断电状态。
