您要查找的是不是：
- HSS OR ALLORY TOOL STEEL 合金钢或高速钢
- Crucible process: Technique for producing cast or tool steel. 坩埚法: 生产优质钢或工具钢的工艺。
- The thread rolling tap is made by tool steel or alloy, the precision is H4. 是指用工具钢、合金钢制造的滚牙（或切牙）丝锥;精度为H4.
- This balance is made of tool steel. 这架天平是用工具钢制成的。
- This paper deals with the properties of PVD and CVD coatings deposited on HSS or carbide tools. 本文研究了沉积到HSS质合金上的PVD和CVD涂层的性能。
- The normal tooth is best suited for sawing of small-chip materials with high carbon content,such as tool steel or cast iron. 正常锯齿最适用于锯切含碳量高的小片材料，比如工具钢或铸铁。
- Tool steel is generally purchased in the annealed condition. 工具钢通常是在退火后买卖。
- A New Type of Tool Steel--Less or Non Ledebrite HSS 新型刀具材料--少无莱氏体高速钢
- A few years ago there were two kinds of steel,machine steel and tool steel. 几年前钢仅有两类：机器钢和工具钢。
- Type: High Strength Cold Work Tool Steels. 类型:高强度冷作工具钢。
- A few years ago there were two kinds of steel, machine steel and tool steel. 几年前钢仅有两类：机器钢和工具钢。
- A solid solution of iron and up to 1 percent of carbon, the chief constituent of hardened carbon tool steels. 马氏本，马登斯体一种由铁和高达百分之一的碳组成的溶液，是硬化碳工具钢的主要成分。
- It is found that as to the saddle-type curved surface, random sampling can get the profile of surface with minimal errors, and has no such trouble as using HSS or LHS, which can reduce time and cost. 由文献中目前对于曲面的量测的研究，大都只限于圆、球或锥体物件的探讨。而本文则针对同时具有凹凸规律特徵的马鞍型抛物曲面量测做探讨，将曲面量测技术再往前跨出一步。
- It is reported that W, Cr, V, Mo in high speed tool steel were determined satisfactorily by ICP-OES. 摘要采用ICP-OES法同时测定高速工具钢中钨、铬、钒、钼元素的含量。
- Carbon tool steel for small production to be quenched in oil, easy to heat-treat. 小批量生产用碳素工具钢,油淬钢,易热处理。
- Buttons are encouraged when piloting in hardened tool steel, based on design constraints. 设计上应限制:在热处理后的模板上导正时应使用嵌套。
- Whether it rains or not makes no difference to me. 下不下雨对我来说都一样。
- All wire burned sections are to be mounted in hardened tool steel with hardened backing plate. 所有的线割入子必须安装在热处理的模板上并有热处理后的支撑板。
- All high-quality tool steel and high-speed steel was long made by the crucible process. 在很长的一段时间内,所有优质工具钢和高速钢都是用坩埚法熔炼。
- Anvil Roller uses the best available high speed tool steel, fully hardened to 62+ Rockwell. 模切底辊选用高品质的高速工具钢，真空热处理至62洛氏硬度之上已确保其耐磨性。
