您要查找的是不是：
- FeAI intermetallics 铁铝金属间化舍物
- The performance of Ni-Al intermetallics coating is good. 涂层耐蚀性能良好。
- The melting and casting technology of intermetallics was reviewed. 对金属间化合物材料的熔炼与铸造工艺进行了综合评述和分析。
- Superplasticity in intermetallics has been researched in the past decade. 金属间化合物超塑性是近十几年开展的研究课题。
- Titanium based intermetallics and composites are not mentioned in this paper. 不包括含钛的金属间化合物及钛基复合材料的研发情况。
- Keywords: TiAl intermetallics, high temperature oxidation resistance, surface modification. 关键词：钛铝介金属、高温氧化抵抗、表面改质。
- In order to alleviate the problems, low dielectric constant (k) materials are used to replace the conventional intermetal dielectric (IMD), SiO2. 为了改善这些问题，使用低介电常数材料作为导线间的介电层为必要选择。
- THE MICROSCOPIC MECHANISM OF ALLOYING ELEMENTS AFFECTING THE DUCTILITY OR BRITTLENESS OF FeAl INTERMETALLICS?? 合金元素韧化或脆化FeAl金属间化合物的微观机制
- The results from EPMA show that here existinter diffusion and molten,but Fe_2Ti intermetallics have not been found. 电子探针分析表明界面层存在相互扩散和互溶但不明显,未发现Fe_2Ti金属间化合物形成。
- H.H. Hsieh, W. Kai, R.T. Huang, C.Y. Lin, T.S. Chin, Intermetallics 14(2006) 917-923. 林致远;金重勋;”铁基块状非晶及块状奈米晶软磁合金”国立清华大学材料科学工程研究所博士论文;2006.
- However,the achievements of Chinese research in intermetallics that has leading effect are not much. 认为我国的研究成果很大，但对国内外研究有重大影响的成果不多。
- Progress in studies on Ni-Al, Fe-Al and Ti3Al intermetallics[J].Special Casting and Nonferrous Alloys, 2001(6): 27-29. Ni-Al系、 Fe-Al系和Ti3Al金属间化合物研究进展[J].;特种铸造及有色合金;2001(6): 27-29
- To dissolve the intermetallics which precipitated from the matrix of the layer, a solution heat treatment is conducted. 接着渗碳，使合金层内形成大量弥散、均匀、细小的合金碳化物。
- In this article, progress in research on super-plasticity in intermetallics is reviewed, with focus on aluminides. 综述了金属间化合物及其合金的超塑性研究进展,并着重介绍了热点研究的铝化物的情况。
- Effect of aluminide , CoCrAlY , Al_2O_3 and TiAlCr coatings on cyclic oxidation resistance of TiAl intermetallics was investigated. 研究了渗铝、Co?30Cr?6Al?0.;5Y（质量分数，%25）和反应溅射Al2O3及Ti?50Al?10Cr（摩尔分数，%25）涂层对TiAl金属间化合物在900和1000℃的循环氧化性能的影响。
- The idea of designing intermetallics based laminated composites is derived from the microstructure of nacre in the nature. 金属间化合物基叠层复合材料是受自然界中贝壳结构的启发而设计的一种新型高温结构材料。
- Low dielectric constant ( low k ) films used as intermetal or interlevel dielectrics can minimize interconnect resistancePcapacitance ( RC) delay,power consumption and cross talk of ULSI. 用低介电常数介质薄膜作金属线间和层间介质可以降低超大规模集成电路(ULSI) 的互连延迟、串扰和能耗。
- The ribbon formation process and the technological parameters affecting the quality of melt spinning NiAl intermetallics were investigated. 摘要研究了金属间化合物快速凝固薄带的成型过程和影响薄带质量的工艺参数。
- Low dielectric constant (low k) films used as intermetal or interlevel dielectrics can minimize interconnect resistance/capacitance (RC) delay, power consumption and cross talk of ULSI. 摘要用低介电常数介质薄膜作金属线间和层间介质可以降低超大规模集成电路(ULSI)的互连延迟、串扰和能耗。
- However,before practical application,the poor high-temperature oxidation resistance and wear resistance of TiAl intermetallics must be solved. 作为最接近实用化阶段的一类金属间化合物,须解决其抗高温氧化和耐磨性差的问题。
