您要查找的是不是：
- Influence and mechanism of RE on the constitutes, structure and wear resistances of Fe base alloy powder sprayed melted coating in diffrent depth is investigated. 本文主要研究了稀土对铁基合金喷熔层不同层深的成分、组织结构及各种耐磨性的影响规律及作用机制。
- The effect mechanism of thermal history of the melt on the phase formation of the rapidly solidified Al Fe based alloys and the phenomenon of which the melt kinematic viscosity dur... 有效地解释了熔体热经历对快凝铝铁基合金中相形成的影响机制，以及长期以来不易理解的、加热过程中熔体的运动粘度比冷却过程中熔体的运动粘度为小的现象。
- Fe base alloy 铁基合金
- Thermal expansion coefficient prediction of ceramic particle reinforced Ni base alloy coating 椭球形陶瓷颗粒增强镍基合金复合涂层热膨胀系数预报
- Hard Facing is weld deposited Cobalt base alloy. 硬面焊接钴基合金沉淀物。
- The high-temperature plasma entered through the breach and melted the supporting materials such as Al alloy and Fe,Ni base alloy, which result in the space shuttle Colum... 对于航空、航天与核动力领域中广泛采用的通用关键材料,应该加强其制备工艺的研究,特别是可视化铸造技术的研究。
- Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process. 通过在机械镀锌过程中添加不同量的稀土金属盐,在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。
- Therma fatigue behaviors of Ni base alloy chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper. 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- The amorphous Fe Cr alloy coatings were obtained by controlling the composition of bath operation conditions. 本实验通过控制镀液组成和操作条件获得了非晶态铁-铬合金镀层。
- Reflector: High temperature processed, layers of alloy coating films. 反射：高温处理后，合金涂层层薄膜。
- Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire. 航空航天系列.;金基合金AU-B40001
- The solution behavior and mechanism of cast WCp/Ni base alloy composite coating are studied. The experimental results indicate that the diffusion reaction solution plays a main part in the solution of cast WCp by wide|band laser cladding. 研究了宽带激光熔覆铸造WCp Ni基合金梯度复合涂层中WCp的溶解方式及机理 ,结果表明 ,在宽带激光熔覆过程中WCp主要以扩散反应溶解为主。
- The technique of hot dip Zn-Ni alloy coating is an effective method for solving the reactive steel problem in hot dip galvanizing. 热浸锌镍合金镀层技术是解决活性钢热镀锌问题的有效方法。
- The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. 研究了热浸镀 5 5%25Al Zn合金镀层钢的室温拉伸性能和耐蚀性能。
- The property of the coating is identical with electroplating Zn-Ni alloy coating in ammoniate. 对航空高强钢低氢脆电镀锌-镍合金工艺进行研究。
- Zinc based alloy electrodeposits have been emphasized for their excellent corrosion resistance. 锌基合金电镀层由于具有优良的耐蚀性而受到人们的关注。
- The average microhardness of the laser clad silicide alloy coating ranges from HV650 to HV750. 涂层组织显微硬度在HV650-750之间,沿层深分布均匀;
- The results showed that the grain size and the corrosion resistance of the alloy coat on tinplate increased as the reflowing time exten... 结果表明,随着软熔时间的延长和软熔温度的升高,镀锡板合金层的晶粒度增大,镀锡板的耐蚀性增强。
- The corrosion resistance of the alloy coat on tinplate was directly related to the life span of the tinplate as a food packaging material. 镀锡板合金层的耐蚀性好坏直接关系到镀锡板用作食品包装材料时的寿命。
- The material may select materials and so on copper, iron, zinc base alloy, tinplate, terne metal. 材料可选用铜、铁、锌合金、马口铁、铅锡合金等材料。
