您要查找的是不是：
- FEM simulation of sheet metal layered forming process has been introduced. 介绍了金属板料分层渐进成形过程有限元模拟。
- In the FEM simulation of the loading identification process, the bending moment maintains a constant amplitude, hut its direction is alterable. 在有限元仿真计算中，弯矩载荷的大小保持不变，但方向可调。
- The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation. 通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
- The residual stress of the heryllium ring weldment was studied by FEM simulation and X-ray stress measurement. 采用有限元分析法和X射线应力测试法对铍环形焊件的残余应力分布规律进行了研究。
- Several CVJOR under different dimensional conditions are made in order to test the validity of the results of the FEM simul ation. 用工艺试验验证了有限元计算结果的正确性。
- It is shown that the stamping forming process can be analyzed by FEM simulation. 动态仿真技术可准确地分析覆盖件的冲压成形过程。
- The thesis is based on the rheology and hydrokinetics of the polymer melt,and calculates the velocity in the die by FEM simulation,and provides die design with theory proof. 本论文中功能块结构的研究，是以熔体的流变性以及流体动力学理论基础上，对在口模中的熔体进行数值模拟，计算出熔体在口模中的流动参数(主要是速度的分布)，从而可以科学的对功能块几何结构进行优化。
- Based on the closed die forging process and the FEM simulation for the pole, the mould structure for precision alternator pole forging is designed. 在磁极的精密模锻生产工艺分析和有限元模拟基础上,设计了磁极精密模锻新工艺参数和新型的锻模结构。
- The FEM simulation of velocity distribution, viscosity distribution and pressure distribution of basket die flow channel was presented. 用有限元法对塑料熔体在筛孔板型机头的筛孔流道内熔体流动进行模拟分析，直观地展示了速度分布，粘度分布，压力分布，以及相关的数值变化。
- With the plane FEM simulation and analysis program SPS_FET2D, the temperature field and stress field is analyzed during whole construction process. 摘要本文采用平面有限元方法，利用自编施工期温变效应仿真分析程序SPS_FET2D，对隧洞典型城门洞段进行浇筑全过程的仿真计算。
- Based on the FEM simulation results, a series of UPVC branch pipes were prepared successfully in a custom-built bulge forming test-bed. 在模拟和优化的基础上，利用自行设计的实验台成功地实现了UPVC三通管的挤胀成型。
- Qian Deling.Loading transfer law and FEM simulation of squeezed branch piles [J].Chinese Journal of Geotechnical Engineering, 2002, 24(3):371-375. [5]钱德玲.;挤扩支盘桩的荷载传递规律及FEM模拟研究[J]
- Comparisons made between the experiment analyses and finite element models show good correlation, and approve the forecast capability of FEM simulation for chip formation. 并对其中的一例模型进行了有限元建模和分析 ,将有限元仿真结果和实验分析结果进行了比较 ,具有很好的一致性 ,证实了有限元仿真对切屑形成的预测能力。
- The knowledge-based and CAX intelligent integration technology can improve the intelligence of FEM simulation and decrease the requirement of the designers. 采用基于知识与CAX（计算机辅助技术）智能集成技术，能较大的提高数值模拟的智能化水平，减少数值模拟软件对用户的要求。
- BP artificial neural network and FEM simulation were applied to optimize the design for the prediction of springback value in the stamping process based on MATLAB. 基于MATLAB平台,将BP神经网络和数值模拟技术应用于冲压回弹预测中。
- The computer system of FEM numberical simulation is also discussed.Finally,the prospects of the applications of FEM simulation to metal deformation are predicted. 对数值模拟的程序实现及关键技术,也作了介绍,并对有限元数值模拟的发展前景作了预测。
- Basic frame of the computer simulation system for 3D flow of profile extrusion die was established. Its modules and functions were introduced. This system consists of 3 modules,which are pre process module,3D FEM simulation module and post-process module. 建立了异型材口模挤出三维流动计算机模拟系统的基本框架 ,介绍了其结构和功能 ,该系统主要包括前置处理、有限元分析和后置处理三大模块 ,有限元分析模块又包括对口模内幂律流体流动的分析模块、粘弹性PTT流体流动的分析模块以及粘弹性PTT流体三维挤出胀大的分析模块 ;
- On FEM simulating its stress and displacement characteristics, the contour of maximum and minimum principal stress have been drawn. 分析结果表明，长白山天池地区高陡斜坡整体稳定性较好，不会发生大规模崩塌。
- A new concept, essential technical design(ETD) for automobile stretching part which provides succeeding FEM simulation with initial conditions, its necessity and characteristics are presented. 提出了要领设计的新概念， 即通过该环节为汽车覆盖拉延件成形的有限元模拟提供初始条件， 分析了要领设计的必要性和特点。
- Takahashi, S., Tsuda, M. etc. 1998.Experimental and FEM simulation od dynamic response of a caisson wall against breaking wave impulsive pressures.Proceeding of 26th Coastal Engineering Conference. 游于正，1990，不规则波碎波压力之试验研究，国立成功大学水利及海洋工程研究所硕士学位论文。
