您要查找的是不是：
- The results of FEM analysis coincide quite well with the measuring results. 通过热模拟实验实测，表明计算结果与实测值相符合。
- Combined with the complexity of 3D FEM analysis of seepage field of underground project, the simulation of faultage was comprehensively discussed. 摘要结合地下工程渗流场三维有限元分析复杂性的实际，对断层的处理进行积极探讨。
- The clamping schemes of thin-walled package were discussed on the base of FEM analysis. 摘要采用有限元分析方法，对薄壁件的装夹方案进行了讨论。
- The clamping schemes of thinwalled package were discussed on the base of FEM analysis. 采用有限元分析方法,对薄壁件的装夹方案进行了讨论。
- FEM analysis software of DYNAFORM was used to simulate the bending form for the support. 运用DYNAFORM有限元数值模拟分析软件,对汽车转向柱后支架的弯曲成形进行了数值模拟。
- FEM analysis of the extrusion-forging process for an automobile knuckle is also introduced. 针对汽车转向节的挤压锻造进行的有限元分析。
- Based upon element by element(EBE) iterative strategies,a feedback multi layer neural model is proposed for the heat conduct problem FEM analysis. 基于Element By Element(EBE)策略 ,提出了一种反馈网络和前向网络共同组成的多层神经网络以实现热传导有限元分析。
- FEM analysis of a kind BRB applicable to space structures was conducted by using software ANSYS.The hysteresis curve of the BRB was obtained. 摘要利用ANSYS程序对一种适用于网壳结构的屈曲约束支撑进行有限元分析，得到支撑的滞回曲线。
- The proposed method is also applicable to the FEM analysis of conrete structures such as bridges post-prestressed with uncoated curve tendons. 该方法还适用于有黏结曲线预应力筋的预应力混凝土结构有限元计算。
- Experiment and FEM analysis for one bridge was finished,and the current technique of test and calculation for mchanical character was summarized. 对某桥梁进行了实测和理论分析，概述了它的力学特性测试及分析计算的现有技术。
- N.H.Nan, C.C.Huang , “The FEM Analysis for LCD module of Clammer-type Handset during Drop,” BenQ Corporation,Mobile BG,2004. 林信昌“手机落槌测试与结构分析”，逢甲大学机械工程所，硕士论文，2004。
- Two specimens at full scale of bidirectional pin-hinged joint in the Guangzhou new TV tower were tested using FEM analysis. 摘要对广州新电视塔钢结构双向铰节点进行了两个典型节点足尺试验研究和有限元分析。
- At the same time, the basic datas and feasible waies for the FEM analysis of the steel structure of the whole contact system are provided. 同时,也为整个接触网系统的钢结构有限元分析系统研究提供了基础数据和可行的方法。
- Then using a constitutive model and carrying out FEM analysis, the behavior of a HDR bridge bearing during its lifespan is clarified. 然后利用一个构成模型和进行FEM分析，阐述了HDR桥支座在其使用寿命期内的表现。
- The test of the strain release coefficients was simulated,and the energy parameter S was obtained based on the FEM analysis resu. 并对随形状改变比能参量S变化的应变释放系数塑性修正公式进行了推广。
- FEM analysis using ANSYS software was carried out to study the stress and deformation of the structure of the paper pulp pad under the static load. 在机电产品的纸浆模塑衬垫设计中,利用ANSYS软件进行有限元分析,研究静载作用下的衬垫受力及变形情况。
- Dissection is the prophase work of FEM analysis, which disparts studied body to the similar type elements through carving up the nets. 剖分是进行有限元计算的前期工作,它主要是通过网格化,将实体划分成具有相同类型的单元。
- So it is quite important to study the modeling, element configuration choice and connect way of each part of steel strobe in the space FEM analysis. 因此，对弧形钢闸门进行空间有限元法计算分析的建模研究，探讨钢闸门各部件单元形态的选择及连接方法显得十分重要。
- There are a lot of data shared during every phases of FEM analysis,this paper introduces the MFC ODBC technology and applies it to FEM analysis system. 在有限元分析各个阶段都存在着大量数据共享,介绍了MFC ODBC技术,并应用于有限元分析系统,实现数据输入输出、浏览及编辑等功能。
- In this paper a FEM analysis model of cable-truss deployable antenna is proposed according to the special requirements for spaceborne antenna. 摘要针对太空索网桁架式可展开天线的结构特点和性能要求建立了天线的有限元分析模型，并对其结构进行了优化设计研究。
