您要查找的是不是：
- Eutectic molten salt 低共熔盐
- The results has shown that Sn was deposited from SnCl 2 BPC molten salt. 结果表明 ,SnCl2 BPC熔盐可用于Sn的电镀 ;
- The basic principle and specific process of eutectic melting boriding in salt bath are investigated initially in this paper. 对盐溶共晶化渗硼的基本原理和具体工艺进行了探讨。
- Spectroscopic Investigation of New Binary Molten Salt Electrolytes Based on Li ClO_4 with Acetamide? 高氯酸锂-乙酰胺新型二元熔盐电解质的谱学研究
- Meanwhile, different thermodynamic models for the prediction of new molten salt hydrates have been evaluated. 介绍了预测熔盐水化物相图的各种热力学模型及其优缺点;
- In the paper, the novel method of electro-deoxidization, namely, FFC Cambridge Process method was used to reduce solid Nb_2O_5 directly to niobium metal in a eutectic melt of CaCl_2-NaCl. 本文采用FFC Cambridge Process法，亦称熔盐电脱氧法，在CaCl_2-NaCl熔盐中，以烧结的Nb_2O_5片为阴极、石墨棒为阳极，在3.;1V电压下将Nb_2O_5直接还原成金属铌。
- In this paper,aluminum-scandium alloys were prepared starting form scandium oxide by molten salt electrolysis. 本文采用了熔盐电解法研究铝钪合金的制备。
- The experimental results show that a thicker penetrating layer of eutectic structure can be formed on the surface of workpieces in shorter time through eutectic melting boriding in salt bath. 结果表明 ,采用盐溶共晶化渗硼可在较短的时间内在工件表面形成较厚的共晶组织渗层 ,渗层硬度适中 ,表面光洁。
- Electrodeposition of Sn from SnCl 2 1 butylpyridinium chloride (BPC) ambient temperature molten salt electrolytes was studied. 在测定了室温型SnCl2 BPC熔盐的物理、电化学性质的基础上 ,进行了镀锡的研究。
- As a new kind of methods to prepare inorganic material powders. molten salt method (MSM) and some of its applications are recommended in this paper. 摘要介绍了一种新的无机材料粉体的制备方法熔盐法，以及该方法的部分应用。
- The advantages of u sing heat carries for indirect heating were shown as early as using water,vapor, molten salt and liquid metal. 利用载体间接加热的优越性，早在利用水、蒸汽、熔盐和液态金属的初期就已经显现出来了。
- The technology of recovering certified molten salt and RE oxide from scrapped molten salt in fluoride electrolysis has been studied in this paper. 主要研究了从氟化体系熔盐电解过程产生的废熔盐回收合格熔盐和氧化稀土的工艺条件;
- This paper deals with the microstructure and property of steel H13 chromized in molten salt and chromized after carburizing. 研究了H13钢经硼砂盐浴渗铬及渗碳后渗铬的组织和性能。
- Study on Eutectic Melting Boriding in Salt Bath 高温渗硼新工艺
- Differential scanning calorimetry (DSC) was employed to investigate the relation of deformation rate and eutectic melting activity energy of AZ91D magnesium alloy by SIMA method. 采用DSC技术研究了SIMA法制备半固态AZ91D镁合金坯料过程中形变率与共晶熔化激活能的关系。
- The current efficiency and surface morphology were effected by SnCl 2 content. A bright Sn deposition was obtained from the 50.0 mol% SnCl 2 molten salt. 熔盐的组成影响电流效率与镀层的形貌 ;5 0 .;0mol%25SnCl2 熔盐可得到平整光亮的锡镀层。
- The effects of the structure of liquid phase on material-transfer during sintering of cera-mic materials have been analysed in the light of theory of molten salt solution. 用熔盐溶液理论分析了液相结构对烧结过程中通过液相的传质过程的影响。
- In this test, two new processes are studied on preparation strontium by the vacuum aluminothermy reduction and Al-Sr alloys by molten salt electrolysis. 本文研究了真空铝热还原法生产金属锶和熔盐电解法生产铝锶合金的两种新工艺。
- FFC Cambridge process is a new technique by which more pure metals,alloys or even nonmetals can be directly electrolysed from solid state oxides in molten salt. FFC剑桥工艺是在熔盐体系中从固态氧化物经一步电解,得到纯度较高的金属、合金和某些非金属新工艺,是一种工艺简单、能耗低的绿色冶金新技术。
- A process was developed for preparat ion of magnesium nietal and magnesiumalloys from the waste salt resulted from molten salt chloridization of Panzihtia titaniumslag. 本文针对熔盐氯化废盐进行了制取镁及锐锰合金的研究。
