您要查找的是不是：
- Euroflock abrasion tester 欧罗磨损试验仪
- Adhesion test using cellophane tape and abrasion test using Tabore Abrasion Tester in the quality control of curtain wall glass are also discussed. 对比了胶带纸剥离法和Tabor磨耗测试法在幕墙玻璃质量控制中的作用.
- Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM. 在磨损试验机上对其耐磨性进行测试,同时利用扫描电镜对试样的磨损形貌进行观察分析。
- The effect of secondarv carbide on the wear resistance of martensitic wear-resistant steel was studied using low-speed three-body grinding abrasion tester. 在低速、碾磨式三体磨损系统中，使用不同粒度的石英砂及玻璃砂磨料，研究了马氏体钢中二次碳化物对其磨损特性的影响。
- The mechanical properties,abrasion performance and mechanism of the RE/MoSi_2 composites were investigated by means of friction and abrasion tester,vickers indentation,X-ray diffraction(XRD),scanning electron microscope(SEM) and microprobe this paper. 采用磨损试验机、压痕法、X射线衍射仪(XRD)、扫描电子显微镜(SEM)及微探针等研究了稀土/MoSi2复合材料的力学性能、磨损性能及机理。
- According to the analysis of the performance of antifriction by using abrasion tester,coefficient of friction and wear loss were measured on the conditions of regular feeding oil and no oil. 采用摩擦试验机对所制备的产物的抗磨性进行了表征分析;确定了正常供油状态下和无机油状态下,该纳米抗磨剂的摩擦因数及其磨损量。
- Schopper rs cloth abrasion tester 肖伯型织物耐磨试验仪
- Schopper's cloth abrasion tester 肖伯型织物耐磨试验仪
- Measurement of wear resistence of tire by new type abrasion tester 用新型磨耗机测试轮胎耐磨性能
- Study on abrasion resistance and wet traction of tire tread by abrasion tester 用室内磨耗试验机研究胎面胶的耐磨性和抗湿滑性
- Research on the Sand Slurry Abrasion Tester with Vertical Multi-clamps 多头立式泥沙磨损试验机试验研究
- A hole or worn spot made by abrasion or erosion. 侵蚀处由于侵蚀或磨擦形成的洞或破处
- Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) 纺织品耐磨性的试验方法(马丁代尔磨擦试验仪法)
- To erode or be eroded by abrasion. 侵蚀通过磨损而侵蚀或被侵蚀
- A dead-weight tester is shown in Fig. 8. 静重试验器如图8所示。
- Place the tester adapter over the opening. 把试验器连接装置放在加油口上。
- Abrasion also abets wind erosion. 磨损作用也助长了风的侵蚀。
- Schopper -Riegler freeness tester S. R. 游离度测定仪。
- Poorly crystallized diamonds used for industrial cutting and abrasion. 结晶差的金刚石用作工业切割和研磨。
- Remember the goal of a software tester? 还记得软件测试人员的目标吗?
