您要查找的是不是：
- Eccentric Wearing Resistance 防偏磨
- High wear resistance and good toughness properties. 具有高的耐磨性和良好的韧性。
- Highest wear resistance for low strain of toughness. 具有最高的耐磨性、在低应力条件下具有最好的韧性。
- For high strain of toughness and good wear resistance. 在高应力条件下具有好的韧性和高的耐磨性。
- Good characteristics for toughness and wear resistance. 具有好的耐磨损和韧性。
- It has a hard and tough film, wear resistance and excellent colour retention. 具有漆膜坚硬、耐磨,保色性好等特点。
- ER5 is a cold work die steel with high wear resistance and toughness. ER5是一种高耐磨冷作模具钢。
- Wear resistant ceramics machine parts. 耐磨陶瓷用作机械零件。
- Urumqi Xinzhou Wear Resistant Material Co., Ltd. 新轴耐磨材料有限公司。
- Through field application, the bi-directional protected box coupling technology solved effectively the tubing and rod eccentric wear problem, reduce the accident of break off, dropout and leak... 通过实际应用,有效地解决了管杆偏磨严重的问题,减少了管杆断、脱、漏事故的发生,取得了较好的经济效益。
- The wear resistance of in-situ Ti-TiC-TiB composites were investigated. 采用摩擦磨损试验机检测了两种材料的抗磨损性能。
- The paper analyzed the features and reasons of tubing and rod eccentric wear in middle-later period of Huanxiling oilfield development, and put forward preventive measures of eccentric wear. 从欢喜岭油田生产实际出发,较全面地分析了欢喜岭油田开发中后期后,出现杆、管严重偏磨的特点、偏磨原因及防偏磨对策;
- Good hardness and wear resistance, moderate impact resistance in the series . 辊环系列中硬度和耐磨性较高，抗冲击性适中。
- The result shows that the eccentric wear of tubing greatly decreases the deformation resistibility capacity and the two-side eccentric wear of tubing leads to more serious tubing failure. 结果表明,油管偏磨大大降低了油管抵抗变形的能力,尤其油管双面偏磨更容易导致油管失效。
- Fabrics made with velveteen, karyotyp skinpass of glossy wear resistance. 平绒的布面绒毛平整，光泽好，耐磨性好。
- The WC-CO coating produced by electrospark deposition on Ti alloy can effectively improve substrate,s wearing resistance. 利用新型电火花强化技术,在钛合金材料表面强化WC-Co,可形成具有高耐磨性能强化层表面。
- The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening. 经水冷和空冷的试样具有高耐磨性的重要原因是其在磨损过程中诱发了马氏体相变，出现加工硬化现象。
- By using abrasive wearing equipment upbuilt by the authors, the wear resistance were determined. 采用作者自行建立的磨料磨损试验方法，测定了它们的质量磨损百分率（即耐磨性）；
- Recommended for important wear resistant structures. 本产品可推广应用于重要的耐磨钢结构。
- The cutting tool must be strong, tough, hard, and wear resistant. 刀具必须具有强度、硬度、韧性和耐磨性。
