您要查找的是不是：
- The age hardening characteristic of Cu Ni Si Cr Fe alloy has been investigated in this paper. 研究了Cu Ni Si Cr Fe合金的时效强化特性。
- The result of determining the content of heavy metals of Ca,Cr,Cu Ni and Zn is identical with that of the normal digestion method(HNO 3-HClO 4. 重金属元素镉、铬、铜、镍、锌含量测定的结果,与用常规消化方法(硝酸-高氯酸)相吻合。
- Rhas been applied in commercial production for treatment of Cu一Ni一Co sulphide,recovery of PGM, extraction Zn from sulphide concentrate andpre-oxidation of refractory gold ores. 这项技术已经在铜镍钴硫化物的处理，铂族金属回收，硫化锌精矿提取锌及难处理金矿预氧化等方面得到了工业化应用。
- On basis of leaching process behaviors of platinum-group metals(PGMs) the lately progress in pressure hydrometallurgy of Cu Ni sulfide ores containing PGMs were presented. 本文以加压湿法冶金处理含铂族铜镍硫化矿过程中铂族金属的行为为主线,介绍了该领域的最新研究进展。
- Refer to standard method of U.S.EPA SW 846,Be Cd Cr Cu Ni Pb Zn in solid wastes of hazardous goods in the field of railway station are determined by using Q 45 microwave digestion system and AAS. 参照美国EPASW846规定的标准方法，采用Q－45型微波溶样系统消解样品，原子吸收法测定铁路桃浦危险品货站固体废渣原样、浸滤渣样、浸提液样中的重金属Be、Cd、Cr、Cu、Ni、Pb、Zn。
- The spark plasma sintering(SPS) was carried out by using C/Cu composite powder prepared by mechanical alloying method. 将用机械合金化法制备的碳/铜复合材料粉末进行放电等离子烧结。
- The spark plasma sintering (SPS) was carried out by using C/Cu composite powder prepared by mechanical alloying method. 摘要将用机械合金化法制备的碳／铜复合材料粉末进行放电等离子烧结。
- Self-adherent composite powder for thermal spraying is designed by optimum design method. 采用正交优化设计的方法进行热喷涂自粘结复合粉末的设计。
- NING Yang.Synthesis and formation of nanophase WC-Co composite powder by ball milling[J].Rare Metal and Cemented Carbides, 2003, 31(1) : 53 - 56. [6]宁阳.;球磨WC-Co纳米复合粉末的合成和成型[J]
- Mg Cu Ni Streng then Effect on Piston Alloy 镁、铜、镍在活塞合金中的强化作用
- The combustion characteristics of potassium perchlorate composite powder were studied by DSC,electron microscope scan and burning test in closed-bomb. 用DSC、电镜扫描和爆发器燃烧试验研究了高氯酸钾复合火药的燃烧特性。
- Heat Treatment Technique of Cu Ni ADI Bucket Teech 铜镍奥贝球铁斗齿的热处理工艺
- Keywords Cu Ni alloy;hard alloy;reamer; 铜镍合金;硬质合金;铰刀;
- Ana- tase is the main phase of the titania in the composite powder, which is in agreement with the characteristic diffraction peaks of anatase presented in the JCPDS card. 纳米复合粉体中的氧化钛为单一类型的锐钛矿相,其XRD衍射峰和JCPDS的锐钛矿特征衍射峰一致。
- Nanometer W-Ni-Fe composite powder was produced by the method of two step reduction of W-Ni-Fe composite oxide powder, in which the procedure parameters were controlled. 利用两阶段还原法对W Ni Fe复合氧化物粉末进行还原,控制还原工艺的参数制得纳米级W Ni Fe复合粉末。
- The applications of nanosized zirconia and composite powder become more and more significant with the development in the electronic and new material industries. 随着电子和新材料工业的发展,纳米氧化锆及其复合粉体的应用越来越广泛。
- Study on the Production Method of Higher Mn ADI Nonalloyed Cu Ni Mo 非Cu-Ni-Mo合金化的高Mn奥贝球铁研究
- During the sintering process of the Al_2O_3-TiC-Co composite powder, the sintering temperature, sintering atmosphere and holding time during heating process were obvious effect factors to the properties of the ATC composite ceramic. 在Al_2O_3-TiC-Co复合粉体的烧结过程中,烧结温度、烧结气氛以及分级保温时间对ATC复合陶瓷力学性能的影响较明显。
- The conventional techniques to prepare nanosized metal composite powder include mechanical alloying (MA), inert-gas condensation (IGC), plasma atomization and sonochemical synthesis etc. 摘要纳米金属复合粉末的制备方法主要包括机械合金化法(MA)、惰性气体冷凝法(IGC)、等离子雾化法、超声化学合成法等。
- CHAI Feng, XU Ling, LIAO Yun-mao, et al． Study of charac- teristics of zirconia toughened glass infiltrated nanometer-ceramic composite powder（Al2O3/nZrO2）[J].J Pract Stomatol, 2002, 18（6）： 518-521. [3] 柴枫; 徐凌; 廖运茂; 等.;氧化锆增韧的纳米复合渗透陶瓷粉体 性能的研究[J]
