您要查找的是不是：
- High card sliver U% and comber sliver U%. 梳棉条与精梳条平均差系数(U%25)高。
- Thin card sliver due to web falling at cards. 由于梳棉棉网下坠导致条子过细。
- At the doffer, fibers are removed and eventually enter the card sliver. 纤维被从落纱机上剥下，形成梳棉棉条输出。
- At the doffer, fibers are removed and eventually enter the card sliver . 纤维被从落纱机上剥下，形成梳棉棉条输出。
- The number and size variation of neps in card sliver have been explored through experiments under different carding output and speed and by use of different type of taker-in. 实验研究了梳棉机在不同产量、不同速度、不同类型刺辊的条件下,生条中棉结的数量和尺寸变化情况。
- The card sliver is not completely uniform in diameter, and the fibers are somewhat random in arrangement. 梳棉棉条的直径并不是完全均匀的。其内部纤维的排列相对混乱。
- Bamboo fiber vortex spinning quality can enhance through advancing fiber regularity of card sliver and decre asing hook and neps. 通过提高生条中纤维整齐度,减少弯钩和棉结,可以提高竹纤维涡流纺纱的质量。
- Further steps may be connected to the card so that the card sliver moves on through additional processes automatically. 下一步的加工可以与梳棉机联接,这样棉条会自动地进入下一工序。
- For yarns that require the additional step, the card sliver goes through the breaker- drawing step and then to the combing operation. 对于需要精梳的纱线,梳棉棉条通过头道并条后,进入精梳工序进行加工。
- The practice of setting new type autoleveler in JF226 high-speed carding machine shows that it can control card sliver weight deviation and unevenness effectively. 新型自调匀整装置安装应用于JF226型高速梳棉机的实践证明能有效控制生条的重量偏差和不匀率。
- Domestic blowing-carding technology and questions of reducing neps and short fibers in card sliver are discussed. 研究探讨了国产清梳联工艺及解决当前生条棉结、短绒的有关问题。
- According to production practice, rational choice of raw cotton, improving blowing process and the carding quality of carding machine can help to reduce the nep of card sliver. 本文分析了生条棉结形成的原因,根据生产实践,通过合理选择原棉、改进清花工艺和提高梳棉机的梳理质量,达到减少生条棉结的目的。
- Influence on structure and property of vortex spinning y ar n of card sliver is evident in bamboo fiber vortex spinning. 涡流纺纺制竹纤维纱生产中,梳棉生条质量对涡流纱结构和性能影响明显。
- Autoleveller is an important device to solve card sliver weight unevenness and difference on blowing-carding-drawing unit. 自调匀整装置是棉纺清钢联系统解决生条重量不匀率及重量偏差的重要装置。
- The continuous system for making ring-spun vams takes fibers directly from the bale and processes them automatically through to at least the card sliver state. 在生产环锭纱线时,如果采用连续加工系统,则纤维从棉包开始,要自动加工至少到梳棉棉条阶段。
- Length,fineness & maturity of cotton assorting fiber,equipment condition of carding machine,working condition of card cloth & carding area and influence on card sliver neps of carding technology were analyzed through test. 通过试验分析了配棉纤维的长度、细度和成熟度、梳棉机设备状态、针布及梳理区工作条件、梳棉工艺对梳棉棉结的影响。
- The primary feature of card sliver weight unevenness control on Trutzschler chute feeding machine lies in the organic integration of small tuftplucking, continuous and regular cotton conveying and autolevelling. 德国特吕茨施勒尔清钢联对生条重不匀的主要控制特点,在于抓棉机的精细抓棉、系统连续均匀供棉以及棉箱和梳棉机自调匀整的有机结合。
- By plenty of experiments on card sliver weight unevenness and Saco-Lowell graphic, the open-loop autoleveller is tested synthetically, and the adjusting effect is analyzed and summarized. 本文通过大量的生条重量不匀率实验和萨式条干对比实验，仅对开环式自调匀整器进行了全面的测试，并分析和总结了该装置的匀整效果。
- The breaker-drawing unit smooths out the card slivers, pulls out the fibers into a thin layer, and re-forms a new sliver. 头道并条机将梳棉棉条的纤维梳理平行顺直并拉伸成薄层,再重新形成棉条。
- Card slivers are fed to the breaker-drawing frame where several card slivers are combined. 梳棉棉条喂人头道并条机,在头道并条机上几根梳棉棉条并合在一起。
