您要查找的是不是：
- Cap Bolts with Tapped Holes 螺纹型螺栓
- Body: Hardcoat Anodized, precision machined mounting surface with tapped hole accessible from bottom side. 身体：硬膜阳极氧化，精密加工与螺纹孔安装从底部可接近表面。
- Recommended tightening torques for the cap bolts are provided with the product data. 推荐的座罩螺栓拧紧扭矩和产品数据一道提供。
- The components are all split type linked by refined bolts with reamed holes for transportation conveniences. 以便于陆路运输，结构分件均制造为拆拼形式，采用精制交制孔螺栓连接。
- Tighten the cap bolts to the torque specified in the product data. 将座罩螺栓拧紧到产品数据规定的扭矩。
- BLACK MILD STEEL HEXAGON BOLTS WITH NUTS B.S. 英制六角螺闩。
- Housings with three drilled and tapped holes for sensors can be supplied on request (fig). 我们可按照用户要求,提供带有传感器三个钻孔和攻丝孔的轴承座(图)。
- High strength bolts for steel structure, bolts for diggers, hex bolts with split pin hole, bolts for automobile cylinder cap and non-standard components. 高强度钢结构螺栓,挖掘机螺栓,六角头绞制孔螺栓,汽车缸盖螺栓及非标准件。
- T-slot cutters--Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes T型槽铣刀第2部分:莫氏锥柄T型槽铣刀的型式和尺寸
- Don't wet your hair with tap water. 不要把头发弄湿。
- Bolts with drilled or undersize heads shall not be used. 被钻孔或头部尺寸太小的螺栓不能使用。
- After loosening bolts with a 9/16" socket, remove bolts completly. 在用9/16英寸套筒松开螺栓后，将螺栓完全拆卸下来。
- Install differential case and dummy bearings in axle housing (without shims) and tighten retaining cap bolts. 在轴壳内（没有垫片）安装差速箱和模型轴承，并紧固固定帽螺栓。
- Size and grade specific cap bolts offer superior clamping force between the cap and base. 座罩螺栓有不同的尺寸和等级,在座罩和基础之间形成理想的夹持力。
- Side view of hexagonal socket bolt with adjustable thread length. 螺纹长度可调整的六角插口螺栓的侧面图。
- Road vehicles. Pneumatic braking systems. Part 1: pipes, male fittings and tapped holes with facial sealing surface. 道路车辆.;气动制动系统
- Side view of square head bolt with adjustable thread length. 螺纹长度可调整的方头螺栓侧面图。
- Body: Hardcoat Anodized, mulitiple mounting options, counterbored holes, tapped holes, extruded "T" slots. 身体：硬膜阳极，多发性安装选项，counterbored孔螺纹孔，挤压“T”型槽。
- Cap bolts (bolts joining housing cap and base) for SNL plummer block housings of strength class 8.8 Are supplied as standard. 标准的SNL立式轴承座有强度为8.;8级的盖子螺栓(连接轴承座盖和底座的螺栓)。
- Side view of hexagonal head bolt with adjustable thread length. 螺纹长度可调整的六角头螺栓的侧面图。
