您要查找的是不是：
- Brinell hardness press 布氏硬度试验机
- Hard-nesses are Brinell Hardness Numbers. 硬度是布氏硬度.
- The forces of Cassius were hard pressed early in the battle. 在战斗初期，卡修斯的部队处境艰难。
- Method of measurement uncertainty evaluation for Brinell hardness test results was introduced in the present work. 文章介绍了布氏硬度试验中测量结果的不确定度评定方法。
- The brinell hardness and the compressive properties increase with TiN content increasing. 其布氏硬度和压缩强度随TiN含量的增加而增大.
- An investigation was made on brinell hardness test with a universal material testing machine. 根据布氏硬度试验的原理 ,提出一种在万能材料试验机上进行布氏硬度试验的方法。
- The Brinell hardness number of the hot rolled plates varies with measurement on the different batch of the products. 通过对热轧中厚板在不同深度上进行布氏硬度的测定 ,表明测量深度对硬度的明显的影响 ,并指出获得稳定值的必要性。
- Carbide balls are usually recommended for Brinell hardness numbers greater than 500. 在布氏试验中碳化物质地的球通常在加载500千克以上时使用。
- It is improved on a basis of HBE-3000.It serves to measure the Brinell hardness of ferrous metals, non-ferrous metals. HBE-3000A电子布氏硬度计 Model HBE-3000A Electronic Brinwll Hardness Tester 该硬度计是HBE-3000的改进型，适用于测定黑色金属，有色金属的布氏硬度。
- The test results shows that there is a linear relationship between Brinell Hardness and the machinability of cast iron with homogeneous microstructure or tiny carbides. 经测试发现，铸铁的组织均匀和碳化物细小时，其布氏硬度与机械加工性能之间呈线性关系。
- It was found that the surface roughness is significant in Brinell hardness testing, but has little influence on Rockwell hardness. 结果表明,表面粗糙度对布氏硬度值有重要影响,而洛氏硬度值与表面粗糙度关系不大。
- In this paper the Brinell hardness of differently hardening titanium under loads 3000Kg HB(3000) and 1500Kg HB(1500) are measured. 本文测试了不同硬度钛在3000公斤和1500公斤负荷下的布氏硬度值HB_(3000)和HB_(1500)。
- The Rockwell and Brinell hardness of 16 metals were investigated. The effects of surface roughness on the hardness values were discussed. 本文通过对16种金属材料布氏和洛氏硬度的测试,讨论了表面粗糙度对它们的硬度值的影响。
- Basic principle and content in standard ASTM E10-01 standard Test Methods for Brinell Hardness of Metallic Materials were described in this paper. 介绍了ASTM金属材料布氏硬度试验方法并与相应的国家标准进行了比较。
- HBE-3000 Electronic Brinell Hardness Tester with 10 steps testing force is able to measure hardness values with each 10 Brinell hardness scales. 电子布氏硬度计具备了10级试验力，可分别测试布氏硬度的10种标尺。
- The piece of cap is made from high heat-resistant material with good heat capacity, and Brinell hardness number in 180 to 135. 帽件由有良好热容的高耐热材料制成，且材料的布里涅尔硬度指数在180到135之间。
- It is improved on a basis of OE-HBE-3000.It serves to measure the Brinell hardness of ferrous metals, non-ferrous metals. 产品用途：该硬度计是OE-HBE-3000的改进型，适用于测定黑色金属，有色金属的布氏硬度。
- I was hard pressed to meet the deadline. 我为赶上截止时间而焦头烂额。
- I'm hard pressed to forget my formerly girlfriend. 对我来讲,忘记前女友是件很困难的事。
- A modification mas made to a current brinell hardness tester so that it can be used to test hardness of soft material under the condition of F/D 2=15 according to ASTM E10. 通过对现有布氏硬度计结构原理的分析 ,采用添加砝码的方法满足了ASTME10中F/D2 值为 15的软质材料的硬度测试。
