您要查找的是不是：
- The traditional design criteria for bolted flanged connections was based on the strength failure, which cannot evaluate in quantity the tightness of flange joints. 传统的法兰设计依据强度失效判据,不能定量估计法兰接头的紧密性。
- Guidelines for Pressure Boundary Bolted Flange Joint Assembly 压力界限法兰连接接头组件的导则
- Advances of Research on Bolted Flange Joints at Elevated Temperature 高温螺栓法兰连接研究进展
- Finite Element Analysis of Bolted Flange Joint under Transient Temperature Field 螺栓联接法兰瞬态温度场分析
- Three-dimensional Finite Element Analysis of Bolted Flange Joint with Transient Temperature 螺栓法兰接头瞬态温度三维有限元分析
- Advances in Bolted Flanged Joints Subjected to External Loads 外载荷下螺栓法兰接头的研究进展
- Joint type of this valve is flange joint. 本阀连接方式为法兰连接。
- Keywords bolted flanged joint;tightness;gasket;stress distribution;FEA; 螺栓法兰接头;紧密度;垫片;应力分布;有限元分析;
- Through adjusting gasket structure, its mechanical performance is changed to consist with request of bolt, so that flange joints can meet the standard of sealing request. 通过垫片工艺结构的调整,使其力学性能与紧固件的要求一致,使法兰接头符合操作时的密封性。
- Design and Development of Drawing Automatic Generation in Bolted Flanged Joints System 螺栓法兰连接静密封系统中图形自动生成方法的研制与开发
- Press bending joint, flange joint and air spring end plate. 扣压弯曲接头，法兰接头和空气弹簧接头。
- Finite Element Analysis on the Bolted Flanged Joint Subjected to External Bending Moments 承受外弯矩作用的法兰接头有限元分析
- The flange joint is a common connection form of high-rising steel tower structure, and bolt looseness of flange is the damage with facilitated occurrence in the structure. 摘要法兰连接是输电线塔等高耸钢结构中常用的一种连接方式，法兰处螺栓的松动是结构容易发生的损伤。
- bolted flanged joint 螺栓法兰连接
- Combining with flange joints fact and the ASME B16.20 to spiral wound gasket request, such as PN 6.3 MPa pipe flange in HG standard, the seating stress of spiral wound gasket was analyzed. 结合法兰连接的实际;按照ASMEB16.;20对缠绕式垫片压缩的要求;以HG标准中PN6
- The system of bolted flange connection 法兰系统刚度
- design of bolted flange connection 螺栓法兰连接设计
- rigidity of the system of bolted flange connection 法兰系统刚度
- rigidity of the bolted flange system 法兰系统刚度
- And a gasket, matching the elastomeric valve seals, is installed in the bottom flange joint, regardless of attached valve type, in order to seal external fluid from the housing interior. 为了密封外壳，使得流体不会从外壳内泄露出来，需要一个与阀门弹性密封相配的垫圈，安装在底部法兰连接件里，而无论所连接的阀门是什么类型。
