您要查找的是不是：
- BHA finite element model 底部钻具组合有限元模式
- Its finite element model is established. 构造了其有限元模型。
- A static finite element model of an air spring was given. 摘要文中建立了空气弹簧的静态有限元模型。
- The finite element model of opening gap tantalum thin-walled tube is setup. 为了控制钽薄壁管焊接成形的质量,进行钽薄壁管开口间隙场计算模型的研究。
- Primary study on the construction of the finite element model of tooth and post-core. 牙齿与桩核三维有限元建模的初步探讨。
- Study Design. In vivo study of a computed tomography (CT)-based nonlinear finite element model (FEM). 研究设计：基于CT的非线性有限元模型(FEM)的体内研究。
- The principles to construct finite element model for modal analysis of the cylinder block have been obtained. 通过研究，得出了建立内燃机机体的有限元模型的一些原则。
- This paper deals with the finite element model of DWX hydraulic prop in aid of Pro/MECHANICA. 本文用Pro/MECHANICA有限元分析软件,建立了柱塞悬浮式液压支柱的有限元模型。
- The finite element model of a small punch test specimen of 1Cr0.5Mo steel is established. 基于小冲孔蠕变试验 ;建立 1Cr0 .;5Mo耐热钢小冲孔蠕变试样的有限元模型。
- The finite element model of the front m ember of one passenger car is created with its CATIA model. 利用轿车前梁的CATIA模型建立其有限元模型。
- Results A three-dimensional finite element model of palatal implant anchorage is successfully constructed, meeting t... 结果建立了符合生物力学研究需要的腭部种植支抗的三维有限元模型。
- Thermal expansion deformation for resistanee spot welding of low-carbonsteel is simulated by an finite element model. 用有限元方法模拟了低碳钢点焊过程的热膨胀变形。
- The present finite element model is shown to be reasonable in predicting the ossicular mechanics of human ear. 研究结果表明本文建立的人耳三维有限元模型对研究听骨链声学力学特性是有效的。
- This paper presents the development of a three-dimensional finite element model of central maxillary incisor. 以上颌中切牙为解剖学基础建立了三维有限元模型。
- Key words: lumbar spine, destabilized spine, interspinous instrumentation, biomechanics, finite element model. 关键词：腰椎，腰椎不稳，椎间融合器，生物力学，有限元模型
- A finite element model of swaying tree was established to explore the kinetic mechanism of swaying tree in wind field. 摘要为了探索树木在风场中摇曳的运动机理，建立了风中摇曳树木的有限元模型。
- Results Dismountable 3 D finite element model of mandible with denture is established. 结果得到具有可拆卸性、多用途的下颌骨及下牙列的三维有限元模型。
- The finite element models simulating normal, pre- and post-PFO were created. 再者，可产生模拟正常、病患的股骨近端截骨术术前及术后情形的有限元素模型。
- The finite element model of hydro-mechanical deep drawing is established based on the commercial software DYNAFORM-PC. 采用商用有限元软件DYNAFORM-PC，建立了筒形件液压-机械拉深过程数值模拟模型。
- Objective：To build a three-dimensional finite element model of temporomandibular joint and the mandible. 目的：建立正常人下颌骨三维有限元模型，为以后的生物力学研究和分析奠定基础。
