您要查找的是不是：
- Curvature monotony condition Tor the quadratic rational B spline curves. 二次有理B样条曲线曲率单调条件
- The paper introduces a new way to calculate the structure of a given woven fabric on the basis of float combination with B spline curve funct. 本文根据浮长线对织物结构影响的原理,结合三次B样条函数,对机织物结构进行计算,根据计算结果可以得到模拟图像效果。
- The sensitivity analysis was developed using the rigid viscoplastic finite element method.The preform die shapes are represented by cubic B spline curves. 表示预锻模具形状的三次B样条曲线的控制系数用作设计变量。
- Optimization of Cam Contour by B spline Curve 利用三次均匀B样条曲线优化设计凸轮廓线
- Wavelets-Based Multiresolution Representation and Edit of B Spline Curves 基于小波的B样条曲线多分辨表示及编辑
- Adds a spline curve to the current figure. 向当前图形添加一段样条曲线。
- Cubic B spline curve 三次B样条曲线
- B spline curve B样条曲线
- T-- B spline curve T-B样条曲线
- In the CAGD field, Coons surface, B spline surface and NURBS surface are mainly used. Coons类曲面、B样条曲面和NURBS曲面是CAGD中主要的曲面表达形式。
- This paper studies the method and process of interpolating the DEM based on rectangular grid with B spline and smoothing spline. 本文研究了B样条和磨光样条应用在基于矩形格网的DEM内插中的思想、方法及实现过程。
- In this article,the gray-scale image LOD scheme is realized by image meshing and B spline subdivision wavelet transform. 通过将灰度图像网格化,并在图像网格上进行B样条细分小波变换,实现了图像的LOD压缩算法。
- Fills the interior of a closed cardinal spline curve defined by an array of. 结构数组定义的闭合基数样条曲线的内部。
- A B-spline curve allows local control over the shape of a spline curve. （B样条曲线允许局部控制曲线的形状。）
- In this paper, it has used three uniform B spline surface to construct the surface of the blade die cavity, and developed a CAD/CAM system of the blade die. 应用双三次均匀B样条曲面，对汽轮机导叶片锻模型腔表面进行曲面构造，据此开发了导叶片锻模CAD及其型腔表面CAM系统。
- This method combines the homomorphic filtering and B spline smoothing.Firstly, a coarse bias estimation is got by Gaussian homomorphic filtering on the corrupted image. 该方法将同态滤波和B样条平滑相结合，首先采用高斯同态滤波器对污染图像滤波，得到初步估计的偏差场；
- Application of B spline and smoothing spline on interpolating the DEM dased on rectangular grid[J].Acta Geodaetica et Cartographica Sinica,2000,29(3):240-244. B样条与磨光样条在基于矩形格网的DEM内插中的应用[J].;测绘学报;2000;29(3):240-244
- A new approach based on cubic polynomial and B spline interposition to rebuild the CAM generated tool path under real time condition is presented in the paper. 本文采用三次参数样条曲线和B样条曲线来实时重构CAM生成的走刀轨迹，以少量的数据点便能达到比直线和圆弧插补高得多的加工精度。
- A cardinal spline curve is used because the curve travels through each of the points in the array. 由于曲线经过数组中的每个点,因此使用基数样条曲线。
- In this paper, an algorithm for constructing rational spline curve, which was tangent to the given polygon, was described. 摘要描述了一种与给定多边形相切的有理样条曲线的算法。
