您要查找的是不是：
- The simulation results show that this method can reduce maximal axial stress by more than 5%, and it observably improves stress distribution. 仿真结果表明，此方法可使螺栓轴向最大应力值降低5%25以上，并有效地改善了应力分布。
- At the same time, the relationship between screwing length and axial stress distribution of bolt screw thread is studied, which offers reference to the design of nut height. 文中还对旋合长度对螺栓轴向应力分布的影响也进行了研究，为螺母高度的设计提供了参考。
- Axial stress distribution 轴力分布
- Therefore establishing axial stress, axial strain, and lateral strain relationships is a timely concern. 因此建立轴向应力、轴向应变和侧向应变的关系是个适时的问题。
- Moreover, the 3D stress distribution is more undulant than the 2D one. 相对而言，三维的应力分布曲线起伏较大。
- The condition of uni axial stress is closely approximated in prismatic bars subjected to pure axial tensile. 承受单纯轴向拉伸和压缩的棱柱杆十分近似地处于单轴的应力状态。
- The equivalent elastic modulus and the nominal axial stress of non-regular holey laminated plates are assumed. 引入等效弹性模量和名义截面应力的概念,建立了单向非规则多孔材料层合板的正交各向异性力学模型。
- According to Mohr-Coulomb failure criterion, the axial stress at failure in rock-soil triaxial tests is in linear relationship with the lateral stress. 根据莫尔-库仑破坏准则,岩土三轴试验的轴向破坏应力与围压之间呈线性关系。
- This method depends on determining the change in stress distribution within the model when it is turned upside down. 倒置法的依据是在模型倒置时测定模型内应力分布的变化。
- The internal stress is consisting of circumferential stress and axial stress, from which the compound stress of the weld seam is derived. 该内应力由环向应力和轴向应力构成,据此推导出了焊缝处的合成应力。
- The effect on the stress distribution will be negligible except in the immediate vicinity of such points. 除了紧靠荷载作用点的区域以外，上述影响均可以忽略不计。
- Through the analysis of support axial stress actual measurement data compared with design numeric, adjust the design scheme of the support and yield good economic returns. 通过对支撑轴力实测数据与设计值对比分析，调整了支撑设计方案，取得了一定经济效益。
- We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces. 我们定义了承受平面力的薄板平面应力分布条件。
- The reads indicate that effective stress and axial stress of the casing in sand production regions increase obviously compared with these of casings in other regions. 结果表明，出砂区域管体有效应力和轴向应力比盖层和底层管体的明显增大；
- Stress distribution is determined in a thin conductive plate containing an elliptic hole under the external electromagnetic loads. 摘要给出一种针对含椭圆孔的导电薄板在电磁力作用下的分析方法。
- Zigzag-type carbon nanotubes have higher shear strength.The axial stress in tubes when the load transferring from outmost tube to inner tube is observed as well. 例如，关于碳纳米管性能研究的实验结果离散性大，仍然需要更加合理的连续介质模型加以解释；
- The results show that the axial additional strain keeps line relationship with the axial stress around the indentation.The optimization of experiment parameters is also discussed. 结果表明，在一定的试验条件下，测点的轴向应变增量与其所受轴向应力间存在良好的线性关系，同时对试验参数进行了优化。
- The phonon field and phason field stress intensity factors and stress distribution at the crack tips are also given. 进一步可以求得裂纹尖端的声子场和相位子场的应力强度因子,由这些应力强度因子求解了裂尖处的声子场和相位子场的应力分布。
- Finite element analysis has been used to calculate the stress distribution in crystals grown by the Bridgman method. 本文用有元分析法计算了 Bridgman 法生长的晶体中的应力分布。
- Under the axial overloading, the relation of the stress distributing between the column and thermal insulation layer with the change of Poisson's ratio is derived,. 研究了在轴向过载条件下药柱和绝热层接触面之间的应力应变分布随泊松比变化的关系。
