您要查找的是不是：
- adjustable charge pump 可调电荷泵
- If you don't like the Auto Adjust results, click Adjust Exposure, and then use the Brightness and Contrast sliders to make the changes yourself. 如果您不喜欢自动调整结果,请单击“调整曝光”,然后使用“亮度”和“对比度”滑块来自己进行更改。
- Belt-driven centrifugal suction charging pump. 皮带传动喷淋泵。
- A novel passive soft-switching technology equipped with a charge pump regeneration (CPR) network is presented. 由此提出一种加入电荷泵能量再生(CPR)网络的无源软开关新技术。
- The proposed approach adds a comparator and a charge pump in the traditional column driver buffer structure. 此架构是在传统的行驱动器缓冲器上加上一个比较器和充电帮浦。
- The slew rate of the circuit is determined by the charge pump but not the op amp. 此电路的充电时间是决定于充电帮浦而非传统的放大器。
- Auto Adjust Focusing of Verity Focus 变焦距镜头组的自适应调焦的实现
- The nonlinearities, such as the “dead zone” of PFD and charge sharing effect of charge pump, are overcome carefully. 该锁相环采用三阶电荷泵结构，解决了鉴相鉴频器的死区、电荷泵的电荷共享等问题。
- The new charge pump is area-efficient and with the PMOS device prevents from Latch-up. 该电荷泵经过面积优化，并且加入防Latch-up效应的PMOS管。
- Finally the thesis discusses a fourfold voltage charge pump only has 8 MOS devices, even 7 MOS. 本文在6管交叉耦合电荷泵的基础上提出了一种8(7)管4倍电荷泵。
- The adjustment of foci is an important system of lensmeter.It can achieve auto adjustment of foci in the measure parameter of eyeglass. 在全自动查片仪系统中,调焦系统是其重要组成部分,在对眼镜片参数的测量中能实现自动对焦。
- Charge Pump circuits are used to generate higher voltages from low voltage inputs, using capacitors as storage elements. 电荷泵电路通常利用电容器作为储能元件从低电压输入产生提高的电压输出。
- The principle of adjustment of foci is introduced and a method to realize it is given.Lensmeter can realize auto adjustment of foci and measure the parameter of eyeglass. 文中介绍了全自动数字查片仪的自动调焦原理,并对其实现方法进行了设计,实现了查片仪的自动调焦和眼镜片各项参数的测量。
- The A8435 high efficiency charge pump IC offer a simple, low-cost white LED driver solution for portable electronics display applications. A8435高效充电泵IC可为便携式电子显示应用提供简单且低成本的白光LED驱动器解决方案。
- The Design of Auto Adjust Light System of Space Surveillance Camera 空间监视相机的自动调光系统设计
- The ADM8845 charge pump is designed for driving up to six white LEDs in parallel while ensuring uniform brightness of a backlit LCD display. ADM8845电荷泵适合用于驱动高达6只并联的白色LED,同时能够保证背光照明液晶显示的亮度均匀。
- Optional temperature sensor adjusts charge voltage setpoint based on measured battery temperature. 可选的温度感应器可通过电池的温度调整充电电压;
- The ADM8845 is also designed to maximize power efficiency by switching automatically between three charge pump modes based on the input voltage. ADM8845可以在3种电荷泵工作模式之间根据输入电压自动切换,所以它还用来最大化功率效率。
- The commutated power of charge pump type was put forward, combined with the technical control demands of electromagnetic forming machine. 结合电磁成形机工艺控制要求，提出了以稳流整流为主，并最终稳压的“电荷泵”式整流电源。
- Actually, due to the large stray capacitance of an on-chip capacitor, a large portion of power is consumed by the charge pump in an EEPROM circuit. 如何减小升压电荷泵的功耗一直是研究的重点。
