您要查找的是不是：
- Austenitic Jnterstrafificafion 奥氏体间层
- Wetted parts: All Austenitic stainless steel and Stellite 6. 接触液体的部件：奥氏体不锈钢和钨铬钴合金6。
- Bolting: Strain-hardened Austenitic Stainless Steel. 螺栓：应变-硬化奥氏体不锈钢。
- Austenitic type stainless steel heat treatment of acid-resistant. 奥氏体型不锈耐酸钢的热处理。
- Measuring static austenitic recrystallization by Back-extrapolation method. 采用后插法来测定静态再结晶分数。
- Macrographic determination of the ferritic or austenitic grain size of steels. 钢的铁素体或奥氏体晶粒度的测度。
- These are bolting materials suitable for high temperature service with austenitic stainless steel valve materials. 这些是适用于高温应用环境的奥氏体不锈钢阀门的螺栓材料。
- The surface reaction of water atomized 304L austenitic stainless steel powder during sintering has been studied. 摘要研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。
- Austenitic Stainless Steel is a Ni-Cr-Mo stainless steel in the AISI Type 316 category. 在AISI类别316范畴中，奥氏不锈钢是一种镍-铬-钼不锈钢。
- Wetted parts: All Austenitic stainless steel and/or Stellite 6. Bronze wedges available. 接触液体的部件：全部都是奥氏体不锈钢和/或钨铬钴合金6。也可提供青铜楔板。
- Mainly used for welding different type of steel and clad steel or similar kind of austenitic steel. 主要用于异种钢或复合钢的焊接或用于焊接相应成分的奥式体钢。
- Intergranular stress corrosion cracking behavior of austenitic steels on hydrogenated high-temperature. 奥氏体钢在高温氢化物中的晶间应力腐蚀开裂性能。
- EFFECT OF NIOBIUM ON SOLIDIFICATION CRACK SUSCEPTIBILITY OF 00Cr25Ni20Nb AUSTENITIC STAINLESS STEEL WELD METALS. 铌对00Cr25Ni20Nb奥氏体不锈钢焊缝凝固裂纹敏感性影响的研究
- The non-sensitized IGC of austenitic SS may be lightened by using high purity SS. 使用高纯不锈钢可以减轻非敏化态晶间腐蚀。
- The causes of the failure of austenitic bellow expansion joint in the operating FCC unit are comprehensively analyzed. 对在役催化裂化装置的奥氏体不锈钢波纹管膨胀节失效原因进行了全面分析 ,由于刚度、温度、安装等因素引起的膨胀节失稳以及Cl-和SO2 引起的腐蚀破坏 ,是膨胀节失效的主要破坏形式。
- The deposited ferritic weld metal shall not contact the austenitic or high-chromium steel cladding. 熔敷的铁素体焊缝金属不应与奥氏体或高铬钢复层接触。
- This paper studied the effect of nitrogen on the corrosion resistance of 316L austenitic stainless steels ( SSs). 本文研究了氮对316L奥氏体不锈钢耐蚀性影响及其作用机理。
- Bead welding process to Q235A was made by TIG welding and H1Cr24Ni13 austenitic stainless steel welding wire. 采用TIG焊方法和H1Cr24Ni13奥氏体不锈钢焊丝,对Q235A进行堆焊加工。
- Properties of pearlitic steel and austenitic stainless steel compound pipes TIG welded joint are studied in this paper. 研究了珠光体钢和奥氏体不锈钢复合管钨极氩弧焊(TIG)接头的性能。
- The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied. 研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
